Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Expert Review
Buyer Beware! Poor Man's Binary Trigger Without All The Safeties!
So, I bought this a while back. Installed it into a PCC. When I took it out to the range, it had issues within the first 10 rounds.
Typically, the way it works is the bcg will move backwards dropping the hammer back down, from there the hammer will be held and slowed by the disconnector till it can be caught and finally held for the next trigger pull by the trigger itself. The disconnector failed to pass it off correctly, resulting in unintentional binary fire. This was inconsistent too.
The click you hear on the trigger release is the hammer falling from the disconnector to the trigger. This appears to be where it's having issues. This trigger had no issues with the disconnector holding the hammer when the trigger is held back, so the issue is likely in either the hammer or the trigger. The issues happened when pulling and releasing the trigger both slowly and quickly as well.
After getting home, I dry fire tested this to see if it would happen under optimal conditions when there was no pressure against the trigger or hammer. The problem occurred during dry fire as well.
Typically, the way it works is the bcg will move backwards dropping the hammer back down, from there the hammer will be held and slowed by the disconnector till it can be caught and finally held for the next trigger pull by the trigger itself. The disconnector failed to pass it off correctly, resulting in unintentional binary fire. This was inconsistent too.
The click you hear on the trigger release is the hammer falling from the disconnector to the trigger. This appears to be where it's having issues. This trigger had no issues with the disconnector holding the hammer when the trigger is held back, so the issue is likely in either the hammer or the trigger. The issues happened when pulling and releasing the trigger both slowly and quickly as well.
After getting home, I dry fire tested this to see if it would happen under optimal conditions when there was no pressure against the trigger or hammer. The problem occurred during dry fire as well.
Most Helpful Positive Review
great trigger
Trigger is light, super easy to install. Took less than 5 minutes to install. Love that it has anti walk pins and clear instructions for install.
By far up to par compared to the more expensive triggers.
Besides the good price, it looks sweet on my Extar ep9
Most Helpful Negative Review
Sketchy and poor anti walk pin quality
I had the same experience as the other reviewer, package received came to my door beat up but I figured the nothing appeared to be damaged so I continued with the install. After the install and noticed that the hammer was dropping on the reset as well. It’s not every time but maybe 1 out of every 5 ...
Read More...
Read More...
Excellent flat trigger for an awesome price.
I bought this trigger to see if it works on my Retay RA 1522 and read that to 9mm should be more powerful and helps for the 22lr rimfire rounds.
I was not disappointed. Super easy to install and an amazing short trigger pull. Works perfectly on my 1522 and I’m pretty sure it will also for the S&M MP 1522.
On top of it the orange trigger with the rest of my rifle being black just looks great.
I’m very satisfied!
I was not disappointed. Super easy to install and an amazing short trigger pull. Works perfectly on my 1522 and I’m pretty sure it will also for the S&M MP 1522.
On top of it the orange trigger with the rest of my rifle being black just looks great.
I’m very satisfied!
Pros:
- Easy installation and adjustment
- great trigger handling
Cons:
- None
Best Used for:
- Retay RA 1522
Would recommend: Yes
Upgrade worth the $$$
I originally built my Ar9 with a milspec trigger, definitely a fun “range toy”. Sometime later this went on sale. This PCC trigger was MUCH cheaper than any other brand I found. Now that I’ve dropped it in & used it… It’s like I have a new gun!
Would recommend: Yes
Good so far
Purchased for my Gforce Jawbone 9mm PCC. No frills drop in trigger pack. Clean break, short reset, and much more appealing that the milspec i was using before.
Would recommend: Yes
Dang nice!
Used on a G-force jawbone. Works perfectly. short pull great reset. Dang nice product.
Would recommend: Yes
as advertised
Great company to work with awesome product was everything and was advertised to be perfect fit awesome
Would recommend: Yes
awesome trigger
Excellent trigger run great no issues real 3.5 pound you feel at least the wall important don’t forget adjusting the small screw to the lower! Enjoy your trigger affordable price
Pros:
- 3.5 constant pull,
Cons:
- None
Would recommend: Yes
S&W 9 mm response
Finally got the time to install the trigger and what a difference it made really happy with it. Now I’m looking forward to getting to shooting it.
Pros:
- easy installation
Cons:
- None
Would recommend: Yes
Great Trigger
Second one purchased. Love the break and very little take-up. Improves accuracy, Highly recommend. Used in a 8" 9mm AR build this time.
Pros:
- Pull and talk-up
Cons:
- None
Best Used for:
- 9mm AR build
Would recommend: Yes
Excellent trigger
The purchase was delivered quickly and the installation was very smooth. Reset is quick and trigger pull i crisp.
Best Used for:
- I used this in my pcc .40 and 9mm
Would recommend: Yes
Very nice and easy installation
I used this for my 9mm pcc. Very smooth and quick reset.
Pros:
- Quick installation
Cons:
- None
Best Used for:
- AR carbine build
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?