Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Pretty good
It works, full size grips work on it but you do have to make sure the safety works, I used short 45 degree safety and didn't have any problems. Feels like heavy duty plastic. Over all not disappointed with it.
Most Helpful Negative Review
It is what it is
The Pearce AR 15 grip simply is what it is. It is a grip that mounts on an AR 15, that allows the user to mount a pair of 1911 pistol grip panels on it, and thereby presents a different look than the normal AR pistol grip. This grip functions as advertised, and is of good quality. Be advised th...
Read More...
Read More...
Pearce 1911 grip
Fit as expected, used these with Ruger 22/45 grip panels on a Ruger lower receiver to achieve the look I was going for.
Would recommend: Yes
1911 grips didn't fit right
Corners stuck off, had to be trimmed. 1911 grip interferes with selector, had to trim the top. Too expensive. I can't remember the brand but there's an alu one I intend to try. Being a fudd, I can't get this 1911 grip idea out of my mind
Would recommend: No
Good, with minor modifications.
So like others have said, the grip panels will require modification depending on your safety selector. Mine I had fo shave off maybe an 1/8th of an inch. I just used a flap disc and light pressure on the G10 grips and it worked good. The bushings are one piece with the grip, so if you want to us Slim line grips you have to use a sharp razor blade to cut the bushings down. Overall I would say it's worth it to use regular grips. Even with the modifications required to use slim grips I would still do it again, but switch to a push button safety.
Pros:
- Price, Finish
Cons:
- Potentially needs modification depending on taste
Would recommend: Yes
Great item but be aware
If you want that custom look to your ar or shotgun that can accept the ar grip, this is for you. To get around the safety hitting the grip, I purchased 2 sets of ambidextrous safety switches and used the shorter switch on both sides.
Would recommend: Yes
Exactly as Described
Bought this to put on my personal rifle. Fit my full size 1911 grips perfectly. However, my Milspec selector was too long and was blocked by the grip from moving to the fire position. I wound up using a shortened, stubby selector that I already had. I don’t know if this happens with all 1911 grips, but that’s what happened with mine. Other than that, excellent product.
Would recommend: Yes
Pearce should redesign the product to fit 1911 grips without having to cut/shave/sand them.
I love my 1911, so for my new build, I thought it'd be great to use the grips I have floating around for my pistol. In theory, this is a good idea. But in practice -this has already been brought up- you'll need to sand or cut, or shave off part of the grip because it won't really fit the frame of the mounted grip onto the receiver. My new build is using an MDT chassis that takes the standard AR grip....just not the Pearce one I guess. The standard 1911 grip panels will hang over the grip frame; my suggestion to Pearce is to redesign the grip frame in such a way that the grip panels fit solely onto it instead of overlapping onto the receiver- which may then not accommodate the 1911 grip slabs. Pearce could then make a good product great.
Pros:
- Good idea
Cons:
- Doesn't fit the 1911 grip on gun
Best Used for:
- ...the fun of it.
Would recommend: Yes
Great grip
Completely changes the feel of the rifle. Rotates your hand up to a more natural position. Could stand to be a bit thinner, but overall a great addition. Those with bigger hands won't have a any problem.
Pros:
- Rotates hand up
Cons:
- A bit too thick with certain 1911 grips
Would recommend: Yes
1 of 1 found the following review helpful.
Looks great.
I have test fitted it on my lower. The product looks and feels solid. My only advice would be to not buy cheap grips. I have bought a cheap set. They do not fit the grip without the spacers. They make the too thick. Not the grips fault, that is totally on me.
Pros:
- Solid and sturdy
Cons:
- None
Would recommend: Yes
Great product
This is just the thing to give my AR an older classic look. Great product, it's quality built, and at a fair price.
It does fit tightly on the lower receiver, I had to start it on a corner and wiggle it. If it bothers you you can always takes a little off the inside edge with some sandpaper or a file. Handles are better tight than loose.
They used UPS to deliver. Delivery by UPS to USPS still confuses me. Why not just send it by USPS and get rid of the 2 to 4 day shipping delay. I still received it in about 11 or 12 days, so it's not too bad. Tracking the package doesn't work well.
It does fit tightly on the lower receiver, I had to start it on a corner and wiggle it. If it bothers you you can always takes a little off the inside edge with some sandpaper or a file. Handles are better tight than loose.
They used UPS to deliver. Delivery by UPS to USPS still confuses me. Why not just send it by USPS and get rid of the 2 to 4 day shipping delay. I still received it in about 11 or 12 days, so it's not too bad. Tracking the package doesn't work well.
Would recommend: Yes
0 of 1 found the following review helpful.
Pearce Grip
These grips are excellent! Looks fantastic on an AR. I bought for a kind of WW2 retro themed AR. They matched up perfect with a set of Kimber wood 1911 grips I had laying around. Definitely would put on another AR of mine.
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?