Your Browser is Outdated
Pro Mag Archangel M1A Precision Stock For Springfield M1A/M14 Desert Tan Polymer AAM1A-DT
$284.99
$259.99
Save $25.00
View Product
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Archangel M1A stock
Best upgrade to my M1A. Fits snug. Didn’t have to do any fitting. Receiver slid right in. The but pad and cheek rest adjustments made it easy to keep my sight picture thru my scope, shot after shot. I would recommend this upgrade to anyone.
Most Helpful Negative Review
Fit is an issue
It was a slog getting a Springfield Armory M1A into this stock. 8+ hours of filing pads and knocking down extensive mold lines have resulted in a toogle over that leaves a 1 centimeter gap between the rear of barrel assembly and the stock. Definitely not the experience I was expecting.
Tight fitting
Simple stock to assemble but forewarned the trigger assembly, may need to be tap in, gently, to lock in correctly. Once seated correctly the stock will stay formed for future dissamble and reassemble. Assembly of Mini 14 300 Blackout with new body only took me 15 minutes with gentle taps with flat round punch and small tomahawk hammer.
Would recommend: Yes
Bring your M1A into the 21st century
This is a great upgrade for the M1A. The ergonomics are great and having the adjustable cheek riser and LOP makes this suitable for just about any person or purpose. It does take some minor fitting, though. Just take your time and remove material in very small amounts in the needed areas to ensure a tight fit. Because that's what you want to ensure accuracy.
Would recommend: Yes
1 of 1 found the following review helpful.
Archangel stock
Perfect fit. No trouble swapping to my rifle. Adjustments are soild. Would highly recommend this product
Would recommend: Yes
1 of 1 found the following review helpful.
Archangel M1A Stock Replacement
This stock is a little heavier than I expected but it feels amazing with the M1A action installed. My eyes aren't what they used to be, and my rifle is scoped. This stock made my gun more functional immediately. Shipping was super fast and it only took about 30 minutes to install. My only gripe is that the length of pull adjustment knob is very stiff, but now that it's adjusted, I don't expect to change it much anyway. Optics Planet had the best price on the web and free shipping.
Would recommend: Yes
1 of 3 found the following review helpful.
Promag Archangel stock for M1A scout squad fit
One thing to add to my initial review. I didn't file down the stock at all. I used a very large pair of channel locks , and 2 rubber pads, to protect the stock and receiver. I positioned the jaws at the back of the receiver and on the stock behind the trigger area and needed very little pressure to get trigger guard to cam over and lock. I did use a little grease on the trigger guard hooks. Also be sure to fully seat the trigger assembly into the cutout on the stock before applying pressure.i got a tight fit with the draw pressure at the muzzle end of the barrel and stock. Watch the video
Would recommend: Yes
3 of 3 found the following review helpful.
Promag Archangel stock for M1A scout squad
I installed the Promag Archangel stock on my SA M1A scout squad. Other mods include a Sadlak oprod guide,Tubb's hammer spring and oprod spring kit, SA unitized gas cylinder and a Sadlak scope mount(after removing the SA forward scope mount). I was having trouble keeping 6" groups at 100 yds with the original OEM setup rifle. I sighted in the scope at 50 yards today and the rifle seems to be grouping at about 1.5" using off the shelf 149 grain fmj ammo. I can't say which mods did what but I'm pleased with the results. The stock did add noticeable weight and reduced the felt recoil.
Would recommend: Yes
2 of 2 found the following review helpful.
M1A Archangel stock
This rifle stock was easy to custom fit to my M1A rifle and maintains a perfect tight fit. The cheek riser and adjustable butt plate are solid and the lower front picatinny is well placed. I would consider this a good value compared to other synthetic stocks I have seen.
Pros:
- Easy fitment
- Adjustable butt plate and cheek riser
- Picatinny lower handguard
Cons:
- None
Best Used for:
- M1A / M14 RIFLES
Would recommend: Yes
Poor fit lots of aggravation
Followed instructions, watched Promag video and it just wont fit without a lot of work. Ive ended up taking it to a gun smith to try and remedy the trigger cams failing to lock down the trigger group . More hassle and expense I was trying to avoid in the first place. I should have bought Sage Ebr
Would recommend: No
0 of 4 found the following review helpful.
Achangel stock
The best price , great stock. I had to a little filing, but no big deal. Now the action fits nice snug, so does the trigger group. Great buy and great stock. Nice feeling stock, good workmanship. My rifle shoots quarter size groups at 400yds.
Pros:
- Great stock
Cons:
- None
Best Used for:
- Sooting
Would recommend: Yes
2 of 3 found the following review helpful.
way off spec
Would not fit my M1A without major filing... I cannot recommend this stock for the average consumer. You’re better off paying for the VLOTR or Sage EBR chassis. I wasted my time (15 days) and money on this product. Never again!
Pros:
- None
Cons:
- Does not fit AT ALL!
Best Used for:
- Door stop
Would recommend: No
0 of 2 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?