Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Easiest gas block to adjust
Everyone complaining about how to adjust this block must be full potatoe.the set screw faces to the right side of the barrel so with nearly any freefloat you can get on it and adjust it. The screw at the front of the block is just a friction screw for the side screw. Fantastic design for guys runnin...
Read More...
Read More...
Most Helpful Negative Review
Backwards - or I don't think like an engineer.
If you assemble this on a carbine or mid length gas tube system you will have to remove your handguard/rail to access the gas adjustment set screw. Really really. I thought I was seeing things at first and slapped the unit together - this block and a Spike's mid-length melonite coated tube, EZPZ -...
Read More...
Read More...
Great Gas Block
Good quality gas block and very slim profile. Easy to install and everything comes with it.
Pros:
- Good Quailty
Cons:
- None
Best Used for:
- ar 15
Would recommend: Yes
Seekins Adjustable Gas Block
Good product and craftmsnship, fit under my rail, and it can be adjusted without taking the rail off. Does not interfere with my muzzle device on the 6-inch barrel I am running.
Would recommend: Yes
Low pro adj gas block…
It is low profile however it required modification to my hand guard to install on PSA 300blk pistol
Would recommend: Yes
good little block for small handguards
This block was used on one of my builds. It worked nicely. I remember it took a bit to adjust the gas system, but once it was adjusted it worked great. Simple, easy, well made. Nice stuff.
Would recommend: Yes
Works well
Easy to install and adjust. Followed online instructions and only took a few shots to fine tune.
Would recommend: Yes
Seeking Adjustable Gas Block
Worked fine on my DPMS lr-308. Fit good but the set screws didn’t line up perfect with the dimples in the barrel. Other than that it installed easy. Tamed the recoil and it no longer smashes my brass upon ejection.
Pros:
- Price
- Low profile
- Adjustable
- comes with roll pin
Cons:
- No adjustment clicks
Would recommend: Yes
Good product slow shipping
The gas block is awesome, the shipping was insanely show to AZ.
Would recommend: Yes
0 of 1 found the following review helpful.
Adjustable gas block
Product is great and was shipped fast. This is great if your looking for an adjustable gas block and easily to install.
Would recommend: Yes
Not very low profile
MK18 rails will not fit, very disappointing. Bulkier than one of my pinned non adjustable blocks even.
Would recommend: No
2 of 2 found the following review helpful.
cannot use with a BCM handguard
Got a criterion heavy barrel, .750, installed this gas block onto it, all seemed well, then I installed the handguard, and boy was it hard to get on, had to heat it up and bang it on with a mallet, but then I noticed a few minutes later that the bottom of the gas block was a hair away from hitting the bottom of the handguard, and any pressure would make them make contact, so for my precision Bill that was a no-go.
Looking into other low profile gas blocks I realized most use a 3/16" set screw, which is about 4.76mm, this seekins uses 15/64" which is about 5.95mm, so thats a 1.2mm difference , not a lot but it is enough, I can't fully blame the gas block since I hear this handguard is pretty slim.
I was thinking about grinding the bottom of it down to fit better, but then I realized when the handguard is installed, it blocks the side adjustment screw for the gas block, and for how hard this handguard is to get on and off it would not be something I would be able to adjust without an hour of work.
So for those two issues make an incompatible with my overpriced handguard I cannot recommend this.
Looking into other low profile gas blocks I realized most use a 3/16" set screw, which is about 4.76mm, this seekins uses 15/64" which is about 5.95mm, so thats a 1.2mm difference , not a lot but it is enough, I can't fully blame the gas block since I hear this handguard is pretty slim.
I was thinking about grinding the bottom of it down to fit better, but then I realized when the handguard is installed, it blocks the side adjustment screw for the gas block, and for how hard this handguard is to get on and off it would not be something I would be able to adjust without an hour of work.
So for those two issues make an incompatible with my overpriced handguard I cannot recommend this.
Would recommend: No
0 of 2 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?