Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Best bolt to put in your gun
AR parts have become a category in which each "new and greatest" advancement must be viewed with skepticism. I've ran these bolts hard and I am a skeptic no more. If you need reliability and performance or your life rides on your gun functioning flawlessly- this is the bolt to have!
This bolt had a problem
The bolt did not work for it was not correctly manufactured. The ejector arm was not properly machined and thus did not allow the bolt to fully seat and lock into the breach. The bolt appears to otherwise be of good manufacturing. The bolt has been returned for replacement for I believe the bolt will be very good if correctly manufactured. I am a bit concerned that I have not been able to communicate with the manufacturer about the ejector problem for I would be content if they sent me a new ejector arm. I am also concerned that the company's QA inspection did not catch the flaw. I would give the part a higher rating if it had worked.
Pros:
- Nice design and finish
Cons:
- poor QA inspection
Would recommend: Yes
Toughest bolt on the market
As mentioned in the other reviews, S7 tool steel has twice the tensile strength, but it also has far more impact strength. It's very unlikely you'll shear off any lugs on this thing. I have a Sharp's XPB bolt and carrier already, but snagged another bolt to put in a WDR titanium carrier. Light carriers move much faster, so having a bolt that can take more stress only makes sense to me. No problems with tolerances, passed headspace checks on a custom Black Hole barrel as well as a cheaper Faxon Gunner barrel. One thing you might consider is a extractor upgrade spring and o-ring kit from BCM, I'm pretty sure Sharp's only uses an o-ring, so the spring could help if you're out in very cold weather and have extraction issues.
Pros:
- reliability
- Tolerances
- S7 tool steel
Cons:
- possibly might need extractor spring upgrade
Would recommend: Yes
it in the steel, not the coating.
if you google ar15 bolts , most are made from carpenter 158 steel. which is a great steel. the tensile strength is 1103 MPA. this relia-bolt is made from S7 tool steel. rated strength at tensile 2025MPA. almost twice as strong. you could not afford the ammo it would take to wear out or break this bolt.
Pros:
- the best bolt avalible
Cons:
- cost a little more.
Best Used for:
- any gun you plan on shooting a lot.
Would recommend: Yes
Best .223/5.56 bolt
Item was well packaged for product protection. Shipping was fast and arrived either on time or earlier. Easy install and performed very well at the shooting range. No stoppages during 500 rounds of shooting 5.56.
Pros:
- Quaility product
- Shipped fast
- Price and install ease
Cons:
- None
Best Used for:
- dependability and quality
- upgrade from OEM
Would recommend: Yes
2 of 2 found the following review helpful.
Sharps Rifle Company Relia-Bolt
Package arrived and no damage to package. Installed the Sharps Rifle Company Relia-Bolt to my standard BCG and fired it at the shooting range unlubed. Fired flawless not issues and fed rounds after every shot. Inspected the Sharps Rifle Company Relia-Bolt no damage after 300 rounds and cleaning was a breeze.
Pros:
- Easy to install
- performed flawlessly with no added lube
- cleaning was a breeze
Cons:
- None
Would recommend: Yes
1 of 1 found the following review helpful.
High quality product
The Sharps Relia-bolt was received in factory package,no damage. Applied some gun oil, installed into my Rubber City carrier with a new cam pin and run 100 rounds with no issues. cleaning has shown no issues with the bolt or carrier.
Pros:
- High quality , silky smooth , easy to clean virtually indestructible.
Cons:
- None so far
Best Used for:
- All .223/5.56 AR15 rifles running any profile gas block.
Would recommend: Yes
1 of 1 found the following review helpful.
Should be the standard for a bolt
I run a short gas system AR which gets exceedingly dirty after a few hundred rounds. The design of this bolt helps it lock in better, even when dirty ensuring reliability. Its top quality and should be the standard all bolts are based upon for a DI system. Few things have evolved for the AR platform over the years but this is a fantastic evolution. Highly recommended for all 223/556/300 blk platforms.
Pros:
- Better design than a standard bolt
Cons:
- None
Best Used for:
- Short barrel builds, personal defense
Would recommend: Yes
4 of 4 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?