Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Drops right in, feels good.
I have minimal firearm experience but am fairly mechanically inclined. Installed with no problems in about 30 minutes. Drop in ready flat trigger from Sig Sauer as featured in their X series firearms.
P365 flat trigger
This is the upgrade you’ve been looking for if you’ve been looking for something other than the OEM curved trigger. There weren’t any other options that were drop in ready that actually improved trigger feel. With these FCUs you’re limited to just changing out the trigger shoe unfortunately.
Pros:
- OEM
Cons:
- None
Would recommend: Yes
Upgrade from OEM Curved
Great quick upgrade to curved trigger on some models. I like there is no trigger safety like some others.
Pros:
- Flat faced
Cons:
- no safety
Best Used for:
- sig 365
Would recommend: Yes
Great trigger
The part fits exactly as it should and is a massive improvement over the stock trigger and the way it fits my hand.
Would recommend: Yes
Nice Trigger Upgrade, Should be standard
This is a nice little upgrade.
SIGGUY install on this is excellent.
SIG really should make these standard. Now that I've been messing with the P365 platform for awhile, SIG should be embarrassed for the up charge on some of these "upgrade" features. It has to costs them pennies difference for the standard trigger vs.
the flat model. Same for the "Coyote tan" colored grips and such. But hey it's the American way. LOL.
I updated an older model as a "test", and will update newer model the same. It's like model building for old guys.
SIGGUY install on this is excellent.
SIG really should make these standard. Now that I've been messing with the P365 platform for awhile, SIG should be embarrassed for the up charge on some of these "upgrade" features. It has to costs them pennies difference for the standard trigger vs.
the flat model. Same for the "Coyote tan" colored grips and such. But hey it's the American way. LOL.
I updated an older model as a "test", and will update newer model the same. It's like model building for old guys.
Pros:
- Looks good, hopefully works better
Cons:
- A little expensive, should be standard
Best Used for:
- P365
Would recommend: Yes
p365 flat trigger.
I have gotten spoiled by flat triggers and other than revolvers I will not purchase a modern pistol that can't be converted.This one through no one other than Sig Sauer was a pain to install ,especially with fat sausage fingers.
Would recommend: Yes
Great Trigger Enhancement
This replaces the curved stock trigger. The flat face enhances the finger position, providing a shortened smoother pull. Installation is easy if you have basic tools and mechanical ability.
Pros:
- Smooth & crisp
- Shortend pull
- good finger position
Cons:
- Mechanical ability required for install
Would recommend: Yes
Flat trigger feels and looks better
I have a p365 w a curved trigger. Bought a p365 x macro tacops w a flat trigger. Flat trigger shoots better and looks nicer. So i had to order this to swap out the curved trigger for the flat one on my p365. Not easy to install. But doable. Watch video by sig guy on youtube before doing it yourself.
Pros:
- Feels nice. Shoots better. Looks good.
Cons:
- Not easy to i stall. But doable.
Best Used for:
- Upgrade to macro trigger.
Would recommend: Yes
FYI not compliant in states with magazine disconnect !! (CA)
Factory flat replacement trigger.
No tabs/bosses on the trigger to accommodate the magazine disconnect for compliant states.
When disassembling the FCU, be very careful not to slide the safety pin out all the way, the sear spring rests on it for tension and it’s a royal pain to get the sear spring back in place! Some DIY videos show to remove both the safety pin and sear pin. Look for a video that shows just partially pulling out the safety pin. Even if the safety lever drops out that’s no big deal to put back in. This info is intended for us do it yourselfers, if you’re a pistol/gun smith I’m sure this wouldn’t be a problem for you.
No tabs/bosses on the trigger to accommodate the magazine disconnect for compliant states.
When disassembling the FCU, be very careful not to slide the safety pin out all the way, the sear spring rests on it for tension and it’s a royal pain to get the sear spring back in place! Some DIY videos show to remove both the safety pin and sear pin. Look for a video that shows just partially pulling out the safety pin. Even if the safety lever drops out that’s no big deal to put back in. This info is intended for us do it yourselfers, if you’re a pistol/gun smith I’m sure this wouldn’t be a problem for you.
Pros:
- OEM flat trigger
Cons:
- Not compliant in some states
Would recommend: Yes
1 of 2 found the following review helpful.
Awesome Addition
Greatly increases the feel of the sig trigger. Best inexpensive upgrade for this pistol.
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?