Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Strike Lite Slide G19
This slide is a beast! Its compatible with a number of different red dots, and as the name states, it is a light slide. All internals installed, its roughly 11oz, OEM is 12. If paired with the Strike Industries upper parts kit, the recoil spring will feel a little weak (15lbs) but is functional. Sli...
Read More...
Read More...
Most Helpful Negative Review
Slide arrived used
Slide took forever to arrive and when it finally did, it was used. Had scratch on front top of slide.wear damage inside, and channel liner already installed, which is not supposed to have. Slide looks good besides the fact it was used.Ive only ordered three items recently from opticsplanet and all t...
Read More...
Read More...
looks awsome!!! firs perfect!
Definitely a nice piece and looks amazing!! Definitely a great addition to my collection!
Would recommend: Yes
Delta Point does not fit.
Finally, I got around to purchasing a Delta Point Pro for this slide. It does not fit. The machining of the slide is off. I will be taking the slide to a gunsmith to have it modified so it fits properly.
Would recommend: No
0 of 1 found the following review helpful.
Strike makes a killer slide.
I've bought both the 19 and 26 strike industries liteslide from OpticePlanet and am running them both. Could not be happier with the perfect nitride finish. Running docter on the 19 and RMR on the 26, I can swap and mix n match to my hearts content. You absolutely cannot go wrong if you want a primo top tier slide at a little over 200 bones.
Would recommend: Yes
3 of 3 found the following review helpful.
Flashy Part with Function
I bought a Liteslide 17 to finish an SCT frame that I was building and it fit just fine. The serrations are grippy and the extra machining is very attractive to look at. It comes with multiple optics plate attachments for different footprints, but I didn't try any of them. So far, after 200 rounds, the finish is holding up very well and it ran with only one stovepipe malfunction.
I will say that the slide came in with smudgy fingerprints all over it. I'm not sure whether this came from the factory or if this may have been a return that came to me, but there were no other issues or signs of wear on it. The dovetail sights I bought for it also were impossible to put on with my sight pusher and required a trip to my gun store to push on with theirs. I have no idea if the issue was the Zaffiri rear sight or the slide, but it was not easy to pair the two.
I will say that the slide came in with smudgy fingerprints all over it. I'm not sure whether this came from the factory or if this may have been a return that came to me, but there were no other issues or signs of wear on it. The dovetail sights I bought for it also were impossible to put on with my sight pusher and required a trip to my gun store to push on with theirs. I have no idea if the issue was the Zaffiri rear sight or the slide, but it was not easy to pair the two.
Would recommend: Yes
SI creates garbage and doesn't stand by their warranty
I recently purchased a Liteslide for gen3 G17. Upon building the slide I attempted to mount a brand new Holosun 509T with a C&H RMR adapter plate. I quickly noticed that the optic was skewed so far that I had to max out windage just to get the dot centered in the window. I also tried with the plate supplied by Holosun as well as with a Holosun 407C and a Swampfox Liberty. All mounted crooked.
I contacted Strike Industries for a Warranty RMA explaining what the problem was and the rep asked for multiple photos which I provided. I also provided detailed measurements taken with a dial indicator which clearly shows the RMR hole pattern was off.
Before closing my RMA tocket, Strike industries reply was "The Liteslide may not be compatible with aftermarket mounting plates" and completely ignored the fact that I used two other optics with the same result.
I contacted Strike Industries for a Warranty RMA explaining what the problem was and the rep asked for multiple photos which I provided. I also provided detailed measurements taken with a dial indicator which clearly shows the RMR hole pattern was off.
Before closing my RMA tocket, Strike industries reply was "The Liteslide may not be compatible with aftermarket mounting plates" and completely ignored the fact that I used two other optics with the same result.
Pros:
- light
- Nice looking slide
- Functional serrations
Cons:
- Optics mounting pattern drilled crooked
- Bad customer service from SI
Best Used for:
- Paperweight
Would recommend: No
6 of 7 found the following review helpful.
Lite slide for Glock 17
This slide works great and it looks great. I wanted the RMR cut and it accommodated my holosun red dot perfectly. It was very easy to install.
Pros:
- It was affordable and easy to I stall
Cons:
- none so far
Would recommend: Yes
1 of 1 found the following review helpful.
Pretty good for G17 build
Wanted a G17 slide that looked nice and has RMR cut.
This works great with OEM glock parts.
But I'd advise against using this slide with Strike Industries slide completion kit, the tolerances on their extractor and extractor plunger is subpar and led to FTE and annoying out of battery.
This works great with OEM glock parts.
But I'd advise against using this slide with Strike Industries slide completion kit, the tolerances on their extractor and extractor plunger is subpar and led to FTE and annoying out of battery.
Pros:
- Looks great & works well,easy install
Cons:
- Too sharp on the edges
Best Used for:
- rmr glock
Would recommend: Yes
Amazing slide!!
This is my 8th Strike Industries LITESLIDE. I have them on a G17, G19, and G48. Amazing texturing and feel. The optics mounting system is great and almost any common optic can be mounted easily. Highly recommend these slides!
Pros:
- price construction quality
Cons:
- None
Best Used for:
- Home Defense
Would recommend: Yes
1 of 1 found the following review helpful.
Amazing slide!!
This is my 8th Strike Industries LITESLIDE. I have them on a G17, G19, and G48. Amazing texturing and feel. The optics mounting system is great and almost any common optic can be mounted easily. Highly recommend these slides!
Pros:
- price construction quality
Cons:
- None
Best Used for:
- Home Defense
Would recommend: Yes
Strike Industries G19 lite slide FDE
Highly recommended everything fits perfectly no issues. I installed Holosun 507 X2 with ACSS and the provided screws 3x8 label as Vortex works, just don't forget to put the 2 front post to secure the red dot. Looks good too!
Pros:
- lite love the front serration
Cons:
- None
Best Used for:
- Plincking
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?