by
Rocket,
Verified Owner
from OH, United States
Written on February 18, 2024
Luepold scope, very hard to turn magnification knob, so needed the leverage provided by a throw lever. Scope was not listed for fit, but the scope knob measured 1.290 in diameter, match that to the Throw Lever of 1.290 and it works fine. There is a small unsightly gap on the screw side (instructions say there will be), yet it is the correct diameter and worked well. The screw is rather small and could easily be over tightened, so be careful.
Pros:
- Fit my unlisted Luepold scope
- Just enough leverage without being to long
Cons:
- 1.29 ring on a 1.29 scope leaves about a 1/8" gap
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Nick,
Verified Owner
from NJ, United States
Written on December 26, 2023
Better than some of the 3d printed options. Smoother, cleaner, more rigid adjustment
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
s,
Verified Owner
from OR, United States
Written on September 6, 2023
Got this for the worlds defense parallax knob in the universe. Much easier to adjust. Looks good on the scope to know I believe has a nice little American flag which I do enjoy build quality is good nice machining I would definitely recommend it to anybody. That’s looking for a quick lever adjustment..
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Ben H,
Verified Owner
from GA, United States
Written on June 21, 2023
Perfect fit for my Schmidt Bender 5-25x56 PMII scopes. Makes magnification changes much easier than without. The fit and finish is great quality and is specific to my PMII scopes. I have one of these on all of my scopes regardless of brand.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Peter Soos,
Verified Owner
from OH, United States
Written on May 20, 2022
Fits Primary Arms 4-14 x 44 mm Rifle Scope 30 mm First Focal Plane (FFP) PA4-14XFFP308 It fit well. Sturdy. Made out of metal. Look no longer. When I was looking for one, I couldn't find one review on what lever works on that scope. So here it is. You are welcome.
Best Used for:
- Outfitting your scope with something it should have came with from the factory for quick zooming
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Squib,
from AZ, United States
Written on July 4, 2021
Being able to switch back and forth between different zoom levels quickly is incredibly important for engaging multiple targets in a dynamic environment or really for doing anything other than sitting at a bench on a regular firing line. Even scopes with smooth zoom rings are easier to switch on the move using a product like this. Switch view throw levers have held up for me and put up with more use than expected.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Chris,
Verified Owner
from VA, United States
Written on May 31, 2021
These are some of the best throw levers I can find since they are VERY strong and grip the scope tightly without damage or slippage. Easily removed if necessary. As aluminum, they can also be easily Cerakoted. Sized to a great variety of scopes, they are my go-to manufacturer for being unobtrusive, light, and strong.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Matthew Thwing,
Verified Owner
from VA, United States
Written on March 25, 2021
Purchased this for less than the OEM equivalent and it performed just as well. In fact, the anodizing is better on this than the OEM. I will be ordering a few more for other projects and definitely recommend this.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Ken,
Verified Owner
from ID, United States
Written on November 21, 2020
The magnification adjustment on some tactical rifle scopes is sometimes very stiff and difficult to adjust. The Switchview throw lever makes magnification adjustment quick and easy on any scope. I have purchased several of these throw levers for my tactical scopes. They are constructed of high quality materials and assembly is quick and easy.
Pros:
- High quality and quick installation
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Timmay,
from CO, United States
Written on February 29, 2020
Had ordered this and found it was too small, ordered a return, printed the mailing stamp and sent it back and they replaced it for free. New one fits like a glove, makes throwing the zoom extremely easier
Would recommend: Yes
0 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?