Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Everything works well.
We gave it a 4 star rating because the gas block came without a pin. It would be nice if a new pin came with it. We had to use the old pin from the gas block we were replacing. Other than that it works. Shipping was slow but that was expected due to covid19.
Most Helpful Negative Review
QC is not existant with this company apparently
So when I received the gas block it was covered in this white chalky stuff. I washed it off and attempted to install the Trybes Defense gas tube (Rifle length) into the gas block. Could not get the holes to line up. turns out that the white chalky stuff was packed into the gas port hole and was bloc...
Read More...
Read More...
Had to throw away
I got the barrel that included the gas block and tube. I have never had gas tube pin not fit through a block before... this one got so stuck I gave up on it and threw it away. Hopefully the barrel works. I will test it soon.
Would recommend: No
1 of 1 found the following review helpful.
gas block and gas tube fit tightly
Gas block and gas tube fit tightly no play. Finish is a little rough but machining is good
Would recommend: Yes
1 of 1 found the following review helpful.
Getting the right one
I need this one.750, I Have a TRYBE barrel, so I like to keep as many parts from the same company as I can. Well-made short money does the trick. Please make sure if you buy a barrel the gas block is the right size, learned a quick lesson.
Pros:
- Cheap
Cons:
- None
Best Used for:
- 750 barrel
Would recommend: Yes
Good enough for the money
I purchased 2 of these Trybe gas blocks. They seemed a very reasonable price...I needed 1 and thought it would be a good idea to put one back. The finish is a nice blue though a black Parkerizing would be preferable considering the application, The fit is a little loose over the port so the tolerance could be tighter... I am dimpling and pinning so it should not be a problem. The set screws are not standard to other gas blocks, not sure why but they work just fine. I'm probably picking at things, so you know what you're getting.
Pros:
- Price
Cons:
- tolerance
Best Used for:
- sport
Would recommend: Yes
1 of 1 found the following review helpful.
Quality low cost gas block
This is a good quality low cost gas block. If you’re looking to save money on a replacement, or build this is a great option.
Would recommend: Yes
RYBE Defense AR-15 Gas Block
Had to drill out the roll pin hole to get the roll pint to drift through the gas block through the gas tube and the other side of the gas block. Took more effort after the drilling and to drift it through without marring the gas block. Would not buy again. Took a chance on a cheaper price, and found out the quality was not there with the cheaper price.
Pros:
- cost
Cons:
- Quality
- Quailty
Would recommend: No
0 of 1 found the following review helpful.
No screws included
I don't know why the manufacturer would sell an item that doesn't come with the screws. The only reason why I kept it is because it was not expensive.
Pros:
- cheaper
Cons:
- No screws
Would recommend: No
Gas tube blind hole
Gas tube blind hole was not cut to full depth so that the tube would not align with the roll pin or the block port. Was solved by opening the tube hole to full diameter to the depth of the gas tube hole. Would cause a serious problem with the build due to the gas tube getting stuck in the gas block when trying to get them assembled.
Would recommend: No
looks ok but not
I purchased 2 of these. Both had undersized roll pin holes making clean-up required. One of the two wouldn't allow the gas tube to seat fully requiring addition work on milling machine. Pure garbage. You could drag a probe along the side of gas tube hole and feel ridged surface from poor machining. I will not buy these again even for budget build.
Would recommend: No
There are no reviews that match your criteria. Would you like to review this product?