TRYBE Defense Universal Double Port 9mm Full Size Compensator
As Low As
$47.99
Save Up to 36%
View Product
Compare (0)
1 item has been added
Add at least two items to compare
Expert Review
Excellent mounting system
While the look/style of this comp isn't my favorite with most slides, the mounting method is excellent and the performance is what you would expect from a dual port comp.
Compared to all other barrel threaded comps i've used/installed, this is the only one that did not require threadlocker and stayed secure from the first time i mounted it. I really like the mounting design, hopefully they incorporate that into a different style/design (like a single port comp).
As others have stated, a dual port comp can definitely effect the cycling function of your pistol so be prepared to play with different recoil springs depending on what kind of ammo you run. But I found this comp reduced recoil enough to give me less movement on the red dot running 124gr 9mm with a standard spring weight Cruxord guide rod.
This comp makes a G19 almost the same length as a G34.
Compared to all other barrel threaded comps i've used/installed, this is the only one that did not require threadlocker and stayed secure from the first time i mounted it. I really like the mounting design, hopefully they incorporate that into a different style/design (like a single port comp).
As others have stated, a dual port comp can definitely effect the cycling function of your pistol so be prepared to play with different recoil springs depending on what kind of ammo you run. But I found this comp reduced recoil enough to give me less movement on the red dot running 124gr 9mm with a standard spring weight Cruxord guide rod.
This comp makes a G19 almost the same length as a G34.
Most Helpful Positive Review
You may need a more Heavier Recoil Spring, this worked for me !
I have this TRYBE Defense Firearms Universal 9mm. Compensator and use it with my BERETTA 9mm. M9A3 Combat Handgun. I was getting stove-pipe with non. 115 and 124 Loads. But, when I upgraded my Recoil Spring to a more Heavier Spring everything cycles as smooth as can be (NO STOVE-PIPES). I now get...
Read More...
Read More...
Most Helpful Negative Review
Compensators will affect your ammo selection
This compensator looks great. I believe it is also doing its job because I quickly found my Canik would no longer cycle reliably with 115 gr 9mm getting constant stovepipes. I tried 124 gr, cycled and had only one stovepipe per magazine. I will try out 124 gr +P next and see.
Also, this thing was a...
Read More...
Read More...
TRYBE COMP
Very nice! Finish is Awesome fits great would recommend I’m am gonna purchase 3 more.
Would recommend: Yes
greatly reduces muzzle flip
Added this to an m&p 9 full size 1.0 and it did exactly as expected. I did have to get a 13 lb spring as the original was having trouble ejecting 115 grain range rounds. Ran flawlessly once I did that. It actually worked very well on my smith and Wesson fpc as well.
Would recommend: Yes
FDE might as well be bronze
Works great for me but unhappy with what they are calling FDE.
Pros:
- None
Cons:
- finish not as described
Would recommend: Yes
well made but….
Other reviews indicated the set screws bottomed out before they could effectively clamp down on the barrel threads. I have that exact issue with my fde full size model. I fixed the issue by adding a #6 stainless lock washer to each screw. Performance is excellent- helps to produce much tighter rapid fire groups than without it. I recommend it.
Would recommend: Yes
1 of 1 found the following review helpful.
Universal Compensator
Seems like a well made item and would most likely work if I could only figure out how to attach it so all of the holes line up. I would recommend it for anyone who know more about guns than I do.
I have purchase otheritem from this store and have alway happy with my purchase.
I have purchase otheritem from this store and have alway happy with my purchase.
Pros:
- None
Cons:
- Should know a little about guns
Would recommend: Yes
It's junk...
So, I ordered one WITH the matching threaded barrel. The first one I received threaded on fine. It was the set screws that didn't work. They were too long and damaged the compensator, and still never tightened. The second one did the same. I don't know if it was a bad run, but I did notice at least one other review stating the same. If you don't mind cutting the screws shorter, then it may work for you.
Pros:
- None
Cons:
- set screws
Would recommend: No
1 of 1 found the following review helpful.
Comp extraordinar.!
This piece of equipment is spectacular.. Looks great and functions perfectly.. I love it.!
Would recommend: Yes
Fits barrel threaded 1/2x28
This should fit any barrel that is a threaded 9mm barrel, will fit some better than others, so far testing has been limited, during testing the comp has not become loose or caused any issues.
Muzzle flip does seem less, fit and finish is pretty nice.
Bought this during a blazing deal for about $30, and would buy one again if needed.
Muzzle flip does seem less, fit and finish is pretty nice.
Bought this during a blazing deal for about $30, and would buy one again if needed.
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?