Reviews & Ratings for Tyrant CNC I.T.T.S Pistol Trigger — 5 reviews — Page 1

Very nice trigger with very little take up! Easy enough to install and makes a huge difference from the stock trigger. Pair it with the PRP spring kit and you won't be disappointed!

I ordered this because I was getting a slight pinch on my trigger finger from shooting my Echelon, this has fixed that for me. Feels a bit more crisp even. I would have rather all black, but this is fine. Pretty easy install, just take your time.

I am a gunsmith and retired law enforcement officer / firearms instructor, and I have the Powder River Precision Echelon trigger as well. So, I am evaluating the Tyrant CNC trigger from a gunsmith perspective, as well as comparing it to the PRP trigger.

The both triggers are very nicely made. The Tyrant is a bit more of a flat trigger than the PRP, which a bit more toward a hybrid design. I like the trigger bar pivot pin being threaded, it makes for easier assembly than the PRP pin. Both triggers altered the original trigger pull weight about 9 ounces. My original trigger was 4 lbs 8 oz (average) and both new triggers measured 3 lbs 15 oz trigger pull weights (average of 10 tests each). Now for the difference: The Tyrant trigger has a shorter take-up, a little less than 1/16", while the PRP trigger has about 1/8" take-up. Both pull the same distance after take-up to where the sear breaks and both have the same reset distance. The PRP trigger at rest is forward of 90 degrees and breaks at approximately 90 degrees. The Tyrant at rest is about 90 degrees and breaks a little past 90 degrees. The PRP trigger sits further forward than the Tyrant, with the Tyrant over-travel very near the frame (neither good or bad). Powder River Precision has a separate kit with springs to make the trigger pull even lighter or you can buy the trigger and springs as a package. I believe the springs should only be used in a range / competition handgun. Tyrant CNC does not have a spring kit.

The Tyr...
Read More...

The ITTS trigger shoe does reduce pre travel a little, but for me the best part about it is how it feels against the pad of my finger. Im my opinion the factory echelon trigger is very good, but with the ITTS you get more feel of where the wall is, and the felt break is more tactile. Reset is a little more perceptable as well.