Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Very nice
I mounted this on my bushmaster 50 bmg and it is great, my turrets came nearly all the way down 6 clicks up for a 100yd zero so I have all my scope adjustment to go up. This would get me roughly to 1500 yds with my 30 mm scope. Bob Barnhart.
Pros: Lots of scope ajustment
Cons: None that I can see
Weaver Top Mount
Perfect fit sets on top of my AR and gives me the right amount of space to mount my scope
Would recommend: Yes
Weaver Riser
Riser works very well. I was able to mount my Vortex 16x scope on my AR which wasn't an option before. The riser stays in place. The only drawback is the threaded screws against my AR rail. Chewed into the finish a bit.
Would recommend: Yes
Works perfect for moving bolt gun scopes to the ar platform.
I bought this to use a higher power scope for doing load work on Ar's. With low/med rings on a 30mm tube this sets the scope at the perfect height. I would prefer it in QD form, but it is very slim with the recessed screws. I purchased tbe 20moa as all my other rifles have 20moa rails, it keeps Zeros very close when moving scopes around.
Pros:
- Rock solid for the price.
Cons:
- Non QD, but that's a personal preference.
Best Used for:
- Mounting lower optics on the Ar platform.
Would recommend: Yes
1 of 1 found the following review helpful.
On dpms g2
Looks and feels great. Bolts keep snug so I haven't had any backing out after 60 rounds. Love the ability to have full use of my scope now. I would highly recommend to anyone. I also love that it is American made company that has a great standing reputation with fun owners.
Pros:
- Quality
- American made
- Full range of scope
Cons:
- None
Best Used for:
- Long distance shooting.
Would recommend: Yes
2 of 2 found the following review helpful.
20 MOA rail
Do your home work and you'll find not only is this the most effective value for
your money but its high ratings make it a winner. Upon receipt, I found it to be
Made in USA, steel and fit my rifle perfectly. You can't beat American made and
absolute top shelf quality. Total satisfaction in every regard and it arrived in
3 days with free shipping.
your money but its high ratings make it a winner. Upon receipt, I found it to be
Made in USA, steel and fit my rifle perfectly. You can't beat American made and
absolute top shelf quality. Total satisfaction in every regard and it arrived in
3 days with free shipping.
Pros:
- Quality
- Made in USA
- Steel
Cons:
- None
Best Used for:
- Picatinny rail
Would recommend: Yes
2 of 3 found the following review helpful.
20 moa ar riser base
Excellent product. 20moa plus ability to use proper height regular rings by extending mounting surface on the short ar flat top. Seems well made, fits perfect. Haven't shot it yet to see if close to 20moa added yet though.
Would recommend: Yes
2 of 2 found the following review helpful.
Nice rail at nice price
Glad I found this rail to mount a scope on an AR built for long range shooting. I gives me the added 20 MOA of adjustment so my scope doesn't run out of elevation too soon. I can still use my choice of rings too and also get the scope forward far enough. Don't have to use a cantilevered ring set and can keep the scope from getting too high.
Pros:
- Quality & Affordable
Cons:
- None
Best Used for:
- Long range precision shooting
Would recommend: Yes
2 of 2 found the following review helpful.
Great 20 moa rail for AR
Solid base! Needed a little more wiggle room for my 6.5 grendel & this base was the ticket. Mounted a Viper PST w/ seekins rings and the base is just as solid as the rings. Good deal if you need a little more elevation adjustment.
Pros:
- Quality
- cost
Cons:
- None
Best Used for:
- hunting
- long range shooting
Would recommend: Yes
Adds 20 MOA
I maxed out my Vortex Viper top turret and needed just a little more MOA to hit those 1000yd shots. This rail gave me what I needed. Recently went out shooting 1/2 mile shots (880yds) and the rail worked flawlessly.
Would recommend: Yes
Weaver AR top rail riser 20MOA
Purchased this rail to fit my DPMS LR-308, 24" bull barrel which I am using for 100yds.and +. Since an AR platform comes with a "flat" pic rail the length of the receiver, I needed to acquire some downward "cant" so my line of scope intersected my line of bullet flight to retain as many clicks of elevation for longer distances.
This 20MOA rail fits the bill, is adjustable forward or backward on the receiver's built in rail(0 MOA cant) and allows some flexibility for scope positioning for good eye relief, since I can also move the scope mounts forward or back, and I was able to laser sight my scope ahead of range shooting using this mount's forward cant and the internal elevation clicks for preliminary sight-in. Nicely made product, produced here in Wisconsin! Hurrah for American made products.
This 20MOA rail fits the bill, is adjustable forward or backward on the receiver's built in rail(0 MOA cant) and allows some flexibility for scope positioning for good eye relief, since I can also move the scope mounts forward or back, and I was able to laser sight my scope ahead of range shooting using this mount's forward cant and the internal elevation clicks for preliminary sight-in. Nicely made product, produced here in Wisconsin! Hurrah for American made products.
Pros:
- Fit, finish , a quality product
Cons:
- None
Would recommend: Yes
1 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?