Burris 3-9x40mm Fullfield II Rifle Scope w/ Burris 10x32mm Landmark Binoculars gives you a full spot-and-shoot package! This value package from Burris includes the Burris 3x-9x 40mm Fullfield-II Riflescope and the Burris Landmark 10x32mm Binoculars at one fantastic low price.

The Burris Fullfield II Rifle Scope has a one-piece main tube and eyepiece, Burris envied steel-on-steel adjustment system, and HiLume multi-coatings on every single air to glass lens surface. The Burris FullField-II Scope is even more forgiving for eye position, is a little shorter, and a good bit lighter. The magnification ring and eyepiece have been made into one solid unit requiring only two seals rather than three. To change magnification, simply turn the entire eyepiece. Burris Fullfield 2 Scope eliminated most of the potential leak paths in the eyepiece/power ring area and sealed the remainder with special quad seals instead of O-rings. The adjustment system has been moved to improve mounting options and the European-style adjustable eyepiece requires no locking mechanism. The Ballistic Plex reticle has a lower vertical crosshair with small ballistic lines that automatically compensate for bullet drop from 100 to 500 yards for many common cartridges. The Burris Fullfield-2 Riflescope is lighter, better sealed, and has a relocated adjustment system compared to the original Burris Fullfield.

The Burris Landmark Binoculars combine light weight, fully coated lenses and water resistant, fogproof construction. These Burris Binoculars also include a tough rubber armor coating and twist-up eyecups. Top all this off with a neck strap, carrying case, a full year warranty and a very affordable price and you have yourself a synonym for optical value.

Specifications for Burris 3-9x40 Fullfield II Rifle Scope:

Specifications for Burris 10X-32mm Landmark Binocular:

Features of Burris 3-9x40mm Fullfield II Rifle Scope:

• Waterproof: All Burris optics are proven to be absolutely waterproof. Each scope is submerged in water with a temperature of 50° C. The extremely hot water transfers its heat to the scope and the internal nitrogen expends 100% testing assures quality. Each scope is filled and purged at least 24 times with high quality, laboratory grade dry nitrogen. Each nitrogen cycle absorbs airborne and residual surface moisture that is evacuated from the scope. Burris uses specially made quad seals to provide double insurance against leakage.
• Fog proof: The nitrogen contained in the scope is of high quality (ultra dry, laboratory grade nitrogen), ultra pure and ultra clean. To be sure that all airborne moisture and surfaces moisture within a scope is evacuated, testing consists of 24 cycles of pressurizing the scope and then subjecting it to a vacuum. The tests are both cost & time intensive.
• Shock proof: Burris scopes are subjected to extreme recoil tests. An impact machine is used to measure and duplicate the recoil pulse acceleration and duration. This machine has been calibrated and verified by an independent laboratory to replicate the wave frequencies and shock impulses that a scope is subjected to.
• Ballistic Plex reticle - with a basic crosshair reticle, calculating hold-over is a mix of art, science and just plain luck, which is why Burris developed the Ballistic Plex reticle. The key is the copyrighted lower vertical crosshair. With most common hunting cartridges, a shooter can use the reticle to compensate for bullet drop and aim dead-on at targets from 100 to 500 yards out. The need for hold-over guesstimation is eliminated. Using it is simple. Start by sighting-in your rifle at 100 or 200 yards at your scope's highest magnification. Then, once you determine the distance to your target, select the appropriate ballistic line. Add slight hold-over or hold-under for in-between yardages and take the shot.
• Includes binoculars!
• Burris Forever Warranty

Package Contents:

• Burris 200162-BIN10 Value Package:
  • Burris 3x to 9x 40mm Full-Field II Rifle Scope 200162
  • Burris 10x32mm Landmark Binoculars 300198