Steiner 10x50 Military Binocular Laser Rangefinder 398 are lightweight, laser rangefinding binoculars. These unique military-grade binoculars are based around the tried-and-true Porro prism system, perfected and refined by Steiner over many years and offering the most powerful binocular magnification possible in compact binoculars. The Steiner Military Binoculars 10 x 50 LRF design integrates a sleek two-button interface and a powerful laser rangefinder that outpaces its competition with a maximum laser ranging distance of 1,600 yards. These 10x56 Steiner Binoculars are durable to military standards, with nitrogen pressurized interior that assures these waterproof binoculars will never fog up and a large objective lens design that allows large light-gathering capabilities.

The Steiner 10x50 Military LRF's built-in laser range finder utilizes an eye-safe invisible rangefinder laser in the left half of the unit. The digital display is superimposed over the image seen in the unit's right half. By centering the target display on the subject while touching and releasing the "RANGING" button located on top of the right half, the binoculars rangefinders digital display will provide an accurate distance value nearly instantaneously. Holding the laser ranging button for more than three seconds activates the unit's scan mode, which is especially helpful when measuring small or moving targets. Scan mode switches off automatically after 20 seconds to conserve battery life. The Steiner 10X50 Military LRF Binoculars have a wide measurement range from 20 yards to 1,600 yards. With sunshine and good visibility, the unit's accuracy is within approximately one-half of one percent to 1,600 yards.

The Steiner 10x50 Military Binoculars are built around the on Steiner's military-tested, military-approved, tried-and true Porro-prism binoculars optics configuration. The Porro design makes the Steiner Military 10x50 is superior to a comparable binocular of roof-prism design because it loses less light, thus providing brighter image reproduction. Porro prisms provide distortion-free images without the costly addition of phase coatings, and they afford users greater three-dimensional viewing due to the offset binocular lenses. The high-definition mil-spec optical elements provide maximum image clarity and brightness with edge-to-edge sharpness. User focus is set by individual ocular adjustments, which allow for a depth of field from approximately 30 yards to infinite distance, with little or no readjustment needed for varying distances. The Steiner 10x50 Military LRF is pressurized with dry nitrogen fill and is waterproof to a depth of 16 feet. The chassis is made with Makrolon, a fiber-reinforced polycarbonate material that is extremely impact resistant. All alloy components are anodized, and external metal parts are finished in enamel to prevent corrosion. The advanced military-oriented design is armored with Nitrile Butadiene Rubber (NBR) making the new Steiner 10x50 Military LRF Binoculars exceptionally rugged, yet surprisingly light in weight.

Steiner has been an acknowledged leader in the manufacturing of quality binoculars since 1947, specializing in high power binoculars designed to meet the needs of tactical and military users around the world. We are pleased to be an authorized distributor of fine Steiner optics. Our online store offers a wide selection of the best binoculars, spotting scopes, and other outdoor optics.

Specifications for Steiner 10x50 Military Laser Rangefinding Binoculars 398:

Features of Steiner 10 x 50 Military Binoculars Laser Rangefinder 398:

• Genuijne military binoculars, suitable for Military & Governmental Services
• Standard issue for Army, Navy, Air Force
• Useful for Artillery, Target Determination, Border Patrol, Coast Guard
• Ergonomic weight balance - the compact design shifts the center of gravity to the palms of the user's hands, allowing long observation times without getting tired. The rounded shape makes it possible to enter and exit armored vehicles such as tanks without hindrance.
• LONG LASTING RUBBER ARMORING - each Steiner Military 10x50 LRF Binocular is covered with slip-proof, noiseless protective rubber armor, with webbing that gives a perfect firm grip - in cold, heat, rain, sea water and the sun's rays - as well as additional protection against environmental damage. The rubber armoring is extremely rugged and resistant against oil, acid, and salt water. This rubber armoring is slip-proof, noiseless and shock-absorbing thus makes the binoculars comfortable to hold at a maximum ease-of-use.
• EXTREME RUGGEDNESS and LIGHTWEIGHT - these ultra-durable binoculars sport an unbreakable Makrolon inner housing that can deal with the toughest demands while keeping weight low. The extremely resistant military-grade design can cope with the most severe shock and vibration and still guarantees stability.
• NITROGEN PRESSURE FILLING via 2-WAY-VALVE SYSTEM - STEINER's genuine military binoculars are the only ones which have a two-way valve system which means that prior to the process of filling the binocular with nitrogen the normal and humid air existing in the interior of the binocular will be sucked out, and when there is a vacuum inside, dry nitrogen will be blown in. Fogging up or the formation of condensation inside the binoculars is totally prevented by this high-tech solution. Only this method fully guarantees an absolutely condensation-free use of the binocular during changing temperatures and in altitude differences. Even temperature variations between -40° and +80°C do not have any adverse effects on the functionality of STEINER nitrogen-filled binoculars. The unique 2-way-valve technology makes inspection, service and maintenance possible even after a number of years. Optical quality and precision are maintained for decades.
• WATER PRESSURE PROOFNESS - guaranteed tightness/pressure-proofness of 0.5 bar, which corresponds to a water pressure proofness of up to 5 m depth of water. Special sealing technology protect the high-end optics from outer influences. No dust, no dirt and no humidity can penetrate into Steiner binoculars.
• PORRO-PRISM SYSTEM - Porro-prism systems are used in almost all of the high-quality binoculars. This system creates a perfect three-dimensional image and its construction increases light transmission. STEINER's military binoculars offer a bigger depth of field since the two objective lenses are further apart from each other. This has the big advantage that the observer can clearly judge at distance whether one object is behind or in front of another.
• INDIVIDUAL EYEPIECE FOCUS - The STEINER individual eyepiece focus makes observing particularly comfortable. If both eyes are of the same diopter strength, simply set both of the adjusting rings on the eyecups to "0" and you will see clearly from 20 m to infinity. If not, adjust both oculars individually for razor sharp images. Once adjusted, everything will be sharp and clear from approx 20 m to infinity for varying distances. Simple use. Also with a single hand only.
• MULTI COATED OPTICS - STEINER's multi coated optics provides outstanding viewing quality due to extremely high light transmission. All lenses and prisms are manufactured with maximum precision and are specially coated and deliver optimum observing results. Such state-of the art optical technology guarantees absolutely bright, high-contrast and sharply contoured images with natural color definition.

Package Contents:

• Steiner 10x50 Military Binoculars w/ integral Laser Rangefinder 398