I asked Burris about a different scope if it would work on a 416 Remington Magnum. They told me that all their scopes are rated for 50 bmg. So I would think you’re good to go!
Warne low rings. Mine have been rock solid for thr last 19 years and always return to zero if they are removed.
Just the focus ring will move on the Burris Scout 2.75x20mm 1in Tube Second Focal Plane (SFP) Rifle Scope.
The Burris Scout 2.75x20mm 1in Tube Second Focal Plane Rifle Scope features a 20mm objective lens, so any set of 1" low height rings will work for your rifle. If you have a picatinny base, you would need picatinny rings. If you do not have a picatinny base, you would need to purchase one or use dovetail mounted scope rings. Email us at Techsales@opticsplanet.com for further assistance.
The Burris Scout 2.75x20 mm Rifle Scope would be compatible with low height rings due to its small objective lens. I'd recommend emailing s at Techsales@opticsplanet.com and letting us know what specific rifle you intend to mount this scope to. That way we can more accurately recommend scope rings that will work best with your setup.
Yes, the Burris Scout 2.75x20 mm Rifle Scope will work on a Marlin 1895G in 45-70 Gov't. The rings listed at the link below will work to mount the Burris Scout 2.75x20mm Rifle Scope to a Marlin 1895G.
https://www.opticsplanet.com/talley-lightweight-alloy-scope-mounts-for-anschutz-legendary-marlin-montana-winc.html?_iv_parent-gun-model=marlin-model-1895&_iv_gun-model=marlin-model-1895&_iv_tube-diameter=1-in
The Burris Scout 2.75x20 mm Rifle Scope will not fit on a Ruger SR22.
No, this would not be a good option due to the eye relief being 14in, this is more for pistols than rifles.
Yes, it will. Burris lists the eye relief between 8.5" - 14".
This would not be a good option for that rifle as this is a scout scope. It has an extended eye relief for mounting further forward (in the "scout" position), however your Browning BL-22 has the mounting rail directly over the receiver, so this would sit too close to use.