Q&A for Holosun EPS-Carry 1x0.58x0.77in - Reflex Red Dot Sight w/Multiple Reticle System — 118 Questions & 51 Answers

The Hellcat Pro would require you to purchase the C&H Precision Weapons Springfield Hellcat w/ RMSc Footprint Adapter Plate that converts your RMSc cut to the K footprint allowing you to install this optic. The plate can be found by using the link below. Another note, the MRS model of the EPS Carry actually includes an adapter plate that converts the RMSc footprint to the Holosun K footprint, meaning you would not need to purchase the C&H plate if you purchase the MRS model. I will link the MRS model below as well.
https://www.opticsplanet.com/c-h-precision-weapons-springfield-hellcat-w-rmsc-footprint-adapter-plate.html?_iv_code=5HT-RMT-CHSHR-SAHC-EPS
https://www.opticsplanet.com/holosun-carry-enclosed-pistol-sight-w-multiple-reticle-system.html

You will need to use the full-size EPS model opposed to this EPS Carry model. You will then need to use the Leupold DeltaPoint Pro adapter plate that can be purchased from Walther directly if you did not receive it with your PDP. You must modify the plate by removing the rear recoil lugs and shortening the front two lugs by milling or filing them down. The full-size EPS model can be found linked below:
https://www.opticsplanet.com/holosun-eps-enclosed-pistol-sight.html

Yes the Holosun Carry Enclosed Pistol Sight will be compatible with the Mossberg MC2SC. The MC2SC is optic ready from the factory with a Shield RMSc optic cut, the EPS Carry includes an adapter plate that will convert your RMSc cut to the Holosun K cut, allowing you to install the optic.

The Holosun EPS Carry does not include an RMR adapter plate. This model (the MRS) includes an adapter plate for the Shield RMSc footprint. The EPS Carry is dimensionally much smaller than RMR pattern optics. You would be able to use the larger EPS model and purchase the C&H Precision Weapons RMR Adapter Plate to convert any RMR cut to the K footprint. Both the full sized EPS and the RMR to K adapter plate can be found linked below:
https://www.opticsplanet.com/c-h-precision-weapons-rmr-adapter-plate.html
https://www.opticsplanet.com/holosun-eps-enclosed-pistol-sight.html

Yes, this Holosun EPS Carry Enclosed Pistol Sight w/Multiple Reticle System will mount directly to the optic cut slide found on the P365 X-Macro without the need for an adapter plate.

Yes, unfortunately we do not carry a compatible plate for your Shadow 2 Compact. I would recommend the Impact CNC Machine 407K/507K/EPS adapter plate. With that plate, you will be able to install the EPS to your slide.

Yes, this optic will mount directly to the optic ready slide of your P365 AXG Legion without the need for an adapter plate.

Yes, the Holosun Carry Enclosed Pistol Sight w/Multiple Reticle System will mount directly to the optic ready slide on the Canik Mete MC9 without the need for an adapter plate.

If you have an MOS (optic ready) model Glock 19, you can install this optic with plate #4 included with your Glock. If you do not have an optic ready Glock 19, you would need to use the Evolution Gun Works Leupold DeltaPoint Pro Sight Mount which replaces your rear sight with an optic plate. You would then have to remove the rear recoil lugs and shorten the front lugs on the plate in order to install the optic. The adapter plate will be linked below. For each of these options, I would also recommend using the larger EPS model, not the EPS carry. The larger EPS model will better fit the dimensions of your slide, while this EPS Carry model would leave space on either side. The full size EPS model can also be found liked below:
https://www.opticsplanet.com/evolution-gun-works-leupold-deltapoint-pro-sight-mount-for-glocks.html
https://www.opticsplanet.com/holosun-eps-enclosed-pistol-sight.html