Unfortunately, we do not currently carry a compatible mount for your 460 XVR. I would recommend purchasing the Weigand Machine and Design XVR scope base from their website and using a set of low height TRYBE Optics Advanced Scope Rings (linked below).
https://www.opticsplanet.com/trybe-optics-advanced-scope-rings.html?_iv_tube-diameter=1-in&_iv_ring-height=low
The Leupold VX-3 Handgun 2.5-8x33mm Rifle Scope has 15" of eye relief. If you plan to mount the scope to the forward scout-style Picatinny rail, measure the approximate distance from where the eyepiece of the scope would be to your eye. You can also use a M1A style scope mount like the SADLAK M1A Scope Mount (linked below) in order to use a non-handgun scope.
https://www.opticsplanet.com/sadlak-m1a-scope-mount.html
Unfortunately, we do not currently carry the Leupold VX-3 Handgun 2.5-8x33mm Rifle Scope in silver.
For the Leupold VX-3 Handgun 2.5-8x33mm Rifle Scope you will need Leupold Alumina Flipback Lens Covers Model Numbers 59040 and 59055. We currently do not have model 59055 but the objective lens cover model 59040 can be found at the link below.
https://www.opticsplanet.com/leupold-alumina-flipback-covers.html?_iv_objective-lens-diameter=36-mm
The Leupold VX-3 Handgun 2.5-8x33mm Rifle Scope features 15" of eye relief. If 15" is a suitable amount of eye relief for your specific setup then it should work fine.
No. The Leupold VX-3 Handgun 2.5-8x33mm Rifle Scope features 15" of eye relief. This would be an issue mounting this to any rifle platform as you would not be able to see/use this scope.
Yes. As long as the rings are compatible with a 1" tube and have the ability to mount to your pistol/handgun, then they will fit this scope and function as intended.
This particular handgun scope has 15 inches of eye relief. This will be too long for your rifle. Please email us at techsales@opticsplanet.com for better options and a secure mounting solution for your Henry.
Yes, this scope would work for that.
The manufacturer states only that the finish is silver.