It may fit but may require modification/fitting to your rifle platform. This stock is meant for a standard stamped AK receiver and will likely require fitting as AK's do not follow a standard specification which means they are all different, some very slightly and others are completely different. Here are the fit notes provided by Magpul:
"Compatibility Stamped receiver AK-47/AKM/AK-74 pattern rifles with fixed stock, single tang trunnion
*NOTE: Due to the wide range of tolerances of your typical AK, minor fitting of the stock may be required. Not compatible with Yugo pattern AKs or the Norinco Type 56S / MAK-90 due to differences in the trunnion’s tang. Not compatible with traditional milled-receiver rifles.
**Specifications based on factory configuration."
Due to the wide range of tolerances of your typical AK, minor fitting of the stock may be required. Not compatible with Yugo pattern AKs or the Norinco Type 56S / MAK-90 due to differences in the trunnion’s tang
The Magpul Industries MOE Fixed Stock will be compatible with the Kusa KR103.
The Magpul Industries MOE Fixed Stock for AK47/AK74 is not compatible with a NAK9 due to the proprietary interface on the NAK9. I would recommend using the JMac Customs 1913 Adapter, which will install on the rear interface of your NAK9 and allow you to install any 1913 railed stock/brace. The adapter can be found by using the link below:
https://www.opticsplanet.com/jmac-customs-1913-adapter-for-most-ak-pistols.html
Yes, the Magpul Industries MOE Fixed Stock fits AK47/AK74 pattern stamped receiver platform rifles like the Century Arms VSKA.
The Magpul Industries MOE Fixed Stock for AK47/AK74 does come with mounting hardware for an AK47/AKM.
The Magpul Industries MOE Fixed Stock for AK47/AK74 uses the Magpul Industries Clip-on Cheek Risers. These cheek risers can be found at the link below.
https://www.opticsplanet.com/magpul-industries-clip-on-cheek-riser-ak47-ak74.html
The Magpul Industries MOE Fixed Stock for AK47/AK74 should work with that rifle. However, the manufacturer does state, "Due to the wide range of tolerances of your typical AK, minor fitting of the stock may be required."
The Magpul Industries MOE Fixed Stock for AK47/AK74 may fit a Zastava ZPAPM70. I recommend contacting the manufacturer to confirm compatibility with that rifle.
The Magpul Industries MOE Fixed Stock for AK47/AK74 might work on a JTS M12 AK. The manufacturer of that gun states that it is not compatible with aftermarket stocks unless you purchase a compatible stock adapter plate through JTS.