The NcSTAR 1" Shotgun Magazine Tube Mount would not be compatible with a Shockwave as there is not enough available space on the magazine tube to properly mount it.
Yes. The NcSTAR 1" Shotgun Magazine Tube Mount will fit all 12 gauge shotgun magazine extension tubes that are 1" in diameter.
This accessory rail from NcStar is meant to fit 1 inch diameter magazine tubes.
Yes, this will be compatible.
Yes, this would fit.
A complete disassembly is not necessary, but some disassembly is required.
It will as long as you have a 1 inch magazine tube diameter and at least 1.5" of magazine tube to mount too with nothing around it.
It is 1.4" long.
This will fit on both standard magazine tubes and extension tubes so it should fit on your Mossberg 500. Just so you are aware, some shotguns will not have room to mount it on the factory tube between the endcap and the forend so you'll want to make sure you have at least an inch of space at the end.Â
This will fit on both standard magazine tubes and extension tubes. Just so you are aware, some shotguns will not have room to mount it on the factory tube between the endcap and the forend so you'll want to make sure you have at least an inch of space at the end.