Your Browser is Outdated
Beretta Cx4 Storm Accessories Bottom and Side Accessory Rail Kit E00270
Currently Unavailable
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Beretta Cx4 Storm Accessories Bottom and Side Accessory Rail Kit
Perfect fit!
Pros: Perfect fit
Cons: none
Most Helpful Negative Review
Too expensive
It's the only way to be able to add a front grip on the CX4, which is probably why it's priced the way it is. It's a good quality piece of kit, but unless you are desperate to have a foregrip, $55 is way too much money for this thing.
Fits wonderfully
Finally picked this up after debating if it was worth it for some time. Ultimately, there is no better solution for adding accessories to your CX4 Storm carbine. A little on the pricey side for what it is, but the construction is well done, it snaps into place were it should be firmly, even before you put the screws in, you can tell it is an official product.
Pros:
- Well constructed
- snaps firmly into place
- spare screws
Cons:
- a little pricey (but worth it)
Would recommend: Yes
Great addition and fit!
This rail kit is easy to install, does not require you to modify or remove the swivel stud. Comes with 4 mounting screws so if you already had a side rail that comes with the CX4 you can replace all 4 screws to match. Nice fit, and sits tight, not loose at all. Its Beretta stamped as well. Great addition to your CX4!
Pros:
- Fits Great
- Afordable
- Factory Part
Cons:
- None
Best Used for:
- CX4
Would recommend: Yes
1 of 1 found the following review helpful.
CX4 front bracket must have
This should be standard. It provides an attachment point for a front hand grip as well as a 2nd side accessory rail. It easily installed. I attached a folding grip and it improved both my comfort in holding/aiming my CX4 but also my accuracy.
Would recommend: Yes
Cx4 side and bottom rail
I like the looks and fit however I think I'm missing something . The bottom rail snaps on and fits well. The side rail can be used on either side. The side rail snaps over the top edge of the bottom rail component and secures through both with 2 screws. The opposite side has two screws but they do nothing and it leaves the opposite side unsecured, a little floppy when you attach a fore grip. It needs an additional side rail to anchor the opposite side. Holding the front grip doesn't give you the overall confidence I think you should feel compared to the cost of these components. I will probably machine a clip to hold the opposite side of the rail in place if I can't. Buy a second side rail for a reasonable price.
Pros:
- Looks good
- fits good
- was a gift
Cons:
- High priced
- not secured well
- Extra side screws do nothing
- extra side rail not available seperately
Would recommend: Yes
Looks good!!
A bit on the pricey side, but an excellent addition for the storm. It's too bad the mfg. doesn't include it with the rifle. Fits like it should, and looks pretty bad-a$$!! I mounted a fore-grip on the one I got. Ican hear the liberals screaming now!!!!
Would recommend: Yes
1 of 1 found the following review helpful.
Beretta Cx4 Storm Accessories Bottom and Side Accessory Rail Kit E00270
Works out perfectly for fit and function. Simple to install. Allows for forward grip and laser. Still room to add a light if needed or in place of the laser. Tailors the weapon for home defense or run and gun.
Pros:
- Fits properly
Cons:
- pricy but worth it
Best Used for:
- adding forward grip
Would recommend: Yes
1 of 1 found the following review helpful.
Plastic fantastic bracket
Funky bracket works. Beretta should have put a rail on the bottom and sides of the fore-end as an integral part of the stock. Expensive but you'll need it for a bipod or grip and a light. Blends in with the carbine's design. Go 4 it.
Would recommend: Yes
1 of 1 found the following review helpful.
Best Price on the internet
If you have the CX4 Storm you will want this rail kit for the added forward grip. Adds to the look and performance of the rifle for steadying your shots. Attaches with 4 small screws, I recommend using some BLUE lock tight.
Would recommend: Yes
1 of 1 found the following review helpful.
Perfect for my foregrip
Immediately installed it, popped right on and tightened the screws and installed the foregrip. Really improves the look of the CX4 Storm. I also installed a laser and flashlight, now it's complete. Optics has it priced better than most places, plus the quick shipping made everything top notch.
Pros:
- Ability to add accessories
Cons:
- None
Best Used for:
- adding accessories
Would recommend: Yes
1 of 1 found the following review helpful.
Great addition to any Beretta CX4 PCC rifle!
This "add-on" part should be included with all new Beretta CX4 pistol caliber carbine rifles as a standard. Without it, the Beretta CX4 can carry only half the accessories. I certainly hope someone at Beretta USA reads these reviews.
Pros:
- Doubles your CX4's accessory options.
Cons:
- None yet.
Best Used for:
- Fore grip or Grip-Pod, Tactical light or strobe, Red dot aiming device, etc.
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?