by
Hawks,
Verified Owner
from WI, United States
Written on April 29, 2025
Awesome quality. What a difference it has made, a lot more pressure. We'll worth it.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Austin Hall,
Verified Owner
from NC, United States
Written on April 8, 2025
Started having FTEs so I rebuilt my bolt with this kit. It worked fantastically, back up and running.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Mike,
Verified Owner
from NC, United States
Written on September 11, 2024
Was having some extraction issues with a new budget build AR 15 and so I went with the BCM bolt upgrade to see if it could help. Right off the bat noticed a huge difference in the spring and machined parts and an improvement with failure rate of extraction.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
TinCuda,
Verified Owner
from TX, United States
Written on April 8, 2024
Good parts from a solid brand. I bought these as spare parts for if I need to replace something quickly.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Matt,
Verified Owner
from WI, United States
Written on March 24, 2024
You can't go wrong with BCM products! Made in Wisconsin, USA. BCM makes the most affordable high end AR parts out there. Always a good idea to have this product in you spare parts box.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Dante,
from KY, United States
Written on July 24, 2021
Big upgrade from regular tubes and the finish is nice. Replaced my KAK tube as I plan to make this lower pull double duty as both a pistol and a rifle with by swapping out uppers. Makes installation less nerve wracking after the first turn over the detent.
Pros:
- Makes installing receiver extension a no brainer.
Would recommend: Yes
0 of 3 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Mike Inmichigan,
Verified Owner
from MI, United States
Written on April 13, 2021
Bravo put this kit together with maintenance in mind. Rebuild or repair your loose bolt with this kit. Gonna disappear soon. As with all spare parts, Get it before you need it, or the kit becomes unavailable.
Pros:
- Rather nice kit. Must have.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Adam,
from PA, United States
Written on September 23, 2019
Great little kit to store inside your grip along with a spare parts kit. I would recommend purchasing two your first purchase. One to swap the older ones and some to have on stand by. Put 1000 rounds through my first carbine course last weekend.
Best Used for:
- Replacement and on deck stand by
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Steve,
from WI, United States
Written on April 14, 2018
Can't beat BCM when it comes to parts for my AR15. This bolt repair kit has heavy duty replacement parts that are perfect for field repair or just upgrading your original bolt. Once again Bravo Company hits it out of the park.
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Dave,
from AZ, United States
Written on November 10, 2017
They make the best extractor on the market. I recommend not using the O ring until the spring has fired a few thousand rounds. With it you need a vise to put the pin in. If you leave the O ring off you can put the extractor pin in, if you have strong hand/fingers.
Would recommend: Yes
2 of 2 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?