by
Mio,
Verified Owner
from VA, United States
Written on September 13, 2025
Great middle ground between mil spec and match triggers. Crisp, easy to install, no issues at the range.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
GC,
Verified Owner
from NJ, United States
Written on September 3, 2025
This was easy to install and they give you a choice of two different springs for your pull weight which is nice. It’s nice trigger for the money and you’ll find a lot of great reviews on this one. I would try other triggers now from Hiperfire.
Pros:
- great reset
- 2 options included for pull weight
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Freedom Fighter,
Verified Owner
from NE, United States
Written on August 10, 2024
Think 2 stage but a short-short first stage, clear defind wall and then it breaks like a Geissele. First time playing with it I couldnt stop smiling. Its a really neat trigger. I have a Geissele trigger and 3 Rise Armement triggers. I love all my triggers! �
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Elkmaster,
Verified Owner
from IN, United States
Written on February 3, 2024
This trigger has very little creep. Has a clean break and a fast reset.
If you're looking for a duty trigger , that's better than the Mil spec that you have , this is the one you want.Has a very hard hitting hammer strike no failure to fire's with this trigger this is not a target trigger.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
my rifle,
from MI, United States
Written on October 27, 2023
i have not put this in my ar yet but i expect the same quality from it as my 1st hiperfire trigger the i got this fast from optics i am anxious to try it as the the hiperfire i have in another rifle is great
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
alouicious,
Verified Owner
from CA, United States
Written on July 11, 2023
This is a great duty trigger. A bit rougher than expected at first but it smooths out with use or a light polish. I like to use the 4.5 # spring and bend the legs a bit to further reduce the pull weight. After that it's perfect. Also lighter than mil-spec or a drop-in by about 3/4 Oz.
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
mikiegro,
Verified Owner
from VA, United States
Written on February 25, 2023
Replaced an ALG trigger with this because of the light high-speed hammer. The castings are rough especially where the hammer face contacts the firing pin. Not a smooth surface at all. Has some drag on the reset. After some polishing and stoning, the trigger is acceptable but for $100 bucks you shouldn't have to touch it up/ The ALG finish is much nicer and is Nickle boron coated but was willing to try the Hiperfire because of the hammer weight and lock up time. The nice thing about this trigger is there is very little over travel and no take-up with a small amount of pull thru when the sear releases. If your looking for a replacement "duty" trigger than I would go with the ALG or BCM. I could think of other things to waste my money on then a ho hum trigger I wont use.
Cons:
- Finish and machine work aren't top notch
Best Used for:
- backup or spare parts to use as paper weight.
Would recommend: No
2 of 4 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
mikiegro,
Verified Owner
from VA, United States
Written on February 23, 2023
I bought it to replace an ALG trigger. The ALG is smoother but has more take up and more overtravel. Plus it has a full size hammer so it has slower lock up time, but it is a good quality duty trigger. The Hiperfire has quick lock up time, no take up and little pull thru and very little over travel but it seems gritty. I took it out and polished and stoned the disconnect sides and top of sear where hammer pivots on. Then polished the hammer radius that contacts the top of trigger. It is now acceptable but if I were to do it again, I would spend more and get a Velocity or Timney drop in.
Would recommend: No
0 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Frank,
Verified Owner
from TX, United States
Written on January 31, 2021
Bought this trigger April, 2020, and installed it in one of my AR-15s. It did improve the creep, but not to the degree I expected. I finally broke down and purchased a Rise Armament 140 drop in, and was extremely please with its performance. No creep. Very crisp. Very short reset. I should have spent the extra dollars from the beginning.
Pros:
- Better than the original trigger
Cons:
- Did not perform as expected
Best Used for:
- If you have to have mil-spec, this in fine
Would recommend: No
0 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Beararmz2nd,
from PA, United States
Written on November 4, 2020
Item as Detailed in Description.
Chris clean short its just to thw Point. Id never go anywhere else to get a Trigger HiperFire is rhe best. Ill be buying more products from them qn OpticsPlanet.com
Would recommend: Yes
0 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?