by
Scar owner,
from CA, United States
Written on April 13, 2019
As advertised, it only adds 3.6oz (that’s the longer rail too) to the guns weight. Construction looks very solid and well made. Comes with everything needed to install (torx wrenches, vibratite). Highly recommended.
Best Used for:
- Additional rail space for thumb-over grip and mounting accessories.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Joshua Hutcherson,
from UT, United States
Written on February 22, 2019
This is a fantastic upgrade for the SCAR. Lightweight and practical. Easy to install. Though it did not come in factory boxing as pictured on the Kinetic website. Came in a brown cardboard box wrapped in wax paper. One suggestion is to buy an additional hardware kit to replace any screws with stripped heads and to use your own tools. With the supplied Allen wrenches, the screw heads strip out easily. Otherwise, it’s well made.
Would recommend: Yes
0 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
mnt skinner,
from CO, United States
Written on November 20, 2018
The 6.5" is great, as others have noted. Don't forget your torque limiter. OP has the FIXIT one here and was the best value and precision I could find for this job. Also, if you have any muzzle device, make sure it will fit THRU the MREX before you begin installation. I was able to remove the KDG installed yoke in order to make space for my suppressor mount to fit thru the rail. Line up all your screw holes before you open your Vibratite - the factory yoke is prone to move around when you slide the barrel into the receiver. The rail would get 5 stars if instructions were provided. I checked zero after installation and had only shifted an inch right at 100.
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Medic96,
Verified Owner
from CO, United States
Written on October 21, 2018
I love the extra room this gives you. It gives you a better grip on the barrel, and a better platform to mount a light. Definitely worth the money. The website video greatly helps with installation.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
LuckystaR,
Verified Owner
from WA, United States
Written on October 17, 2018
The KDG receiver extension is very light and well built. It provided extra rail space to install a bipod in a forward position. It also provided space for mounting laser / night vision unit in front of the factory iron sights.
Pros:
- Lightweight
- well built
- Compatibility
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Joe,
from OK, United States
Written on August 17, 2018
This is an awesome rail system. Installed it in about 15 minutes. Plenty of rail space where you need it. The only complaint I have is that it sit rather close to the barrel and it didn’t allow for placement of the supplied Picatinny rail where I needed it for vertical grip. Other than that it’s money well spent.
Pros:
- Build quality
- easy installation
Cons:
- Supplied Picatinny rail sections
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
TWAG,
from AL, United States
Written on August 7, 2018
It’s a nice addition, material is great. But was hoping that the color matched the upper it does not. It is the same color as the stock ( UGG BOOT) FYI. I called both optics, and KDG they said they can’t do anything to “match”. You’d have to return it or go with the the 50 shades of FDE. I’m 50/50 on buying this, I feel 250-300 should match.
Would recommend: No
0 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Beware,
from OH, United States
Written on July 31, 2018
It took about 5 days for my order to get processed then another 3-4 day for delivery. I had to change my original order from getting a Sig Sauer Juliet FDE magnify scope after waiting from the beginning of April to changing my order in July. Cause I wasn’t going receive the item till mid September. Beware this store says they have things when they don’t. I checked the sig site and they don’t carry a FDE magnification scope. No one does but this company. The mrex rail will be my last purchase from this company till the can change their shipping speed and have a ready to ship stock on hand.
Would recommend: Yes
0 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Jdamn,
from TX, United States
Written on July 23, 2018
This is a great addition to your scar. I purchased while it was on sale and after installing I wish I had bought it sooner. Easy install and makes for a better feel of the rifle. It skins down the front of the gun and allows extra area for accessories. It also allows the bi pod to sit further forward.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
JNS3113,
Verified Owner
from AL, United States
Written on June 7, 2018
The mrex is very sleek and durable, made to handle the scar platforms. I went with the mlok rails, which looked better of my 17 then the picatinny. The you tube video was extremely helpful for the install and tales you step by step through the process.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?