Your Browser is Outdated
Live Free Armory Completed LF19 Combat Compensated Slide
As Low As
$284.99
Save Up to 25%
View Product
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
A bit of an issue, but their customer support is excellent.
I received my slide, and of course put it together with my GEN2 Glock 19 lower. Took it to the range, started shooting targets and much to my disappointment, about every second or third round I would have shallow hits on the primers of the rounds. This went on for about 100 rounds. I then quit. D...
Read More...
Read More...
Most Helpful Negative Review
Three issues
There were three things wrong with this slide. First, it did not come with the fiberoptic front sight as advertised. Second, there was rust on the inside of the slide where the slide cover plate fits. Finally, the firing safety pin was stuck so it would not be drop safe.
I tried oiling the firing p...
Read More...
Read More...
Three issues
There were three things wrong with this slide. First, it did not come with the fiberoptic front sight as advertised. Second, there was rust on the inside of the slide where the slide cover plate fits. Finally, the firing safety pin was stuck so it would not be drop safe.
I tried oiling the firing pin safety and plunging it a few times to loosen up any burs or cerakote. It did not help. I am not screwing around with a safety feature. It is not worth it.
I had another LFA slide and it was great. Sad to see this one fail miserably.
I tried oiling the firing pin safety and plunging it a few times to loosen up any burs or cerakote. It did not help. I am not screwing around with a safety feature. It is not worth it.
I had another LFA slide and it was great. Sad to see this one fail miserably.
Pros:
- nice cerakote color.
- design looks great
Cons:
- not as advertised
- safety
- rust
Best Used for:
- i would not trust this
Would recommend: No
1 of 1 found the following review helpful.
good product for the money
Looks great And functions great after a small amount of tinkering. Had to trim an optic screw to get it to function and sand the breech face because the cerakote was too thick to chamber a round. But once I did that, it’s run flawlessly since. Mitigates a little bit of recoil but really makes a nice difference with the addition of a ported barrel.
Pros:
- Recoil mitigation
Cons:
- thick cerakote
Would recommend: Yes
1 of 1 found the following review helpful.
Good for malfunctions/range
Bought this for my EDC. Having a milled in compensator was nice, I noticed a flatter shooting experience when compared to my original slide. Issues began once I mounted my Holosun EPS. The holes for the for the RMR footprint were over-milled. Once I put my adapter plate on for my optic I began having more malfunctions than I ever had before. Once I figured out it was from the screw pressing on the extractor plunger I took the slide apart, dremmeled down the screw just enough to not compress the plunger. This fix worked for a while until I noticed my plate was loose, when taking it apart again I’m unable to get take the plunger out despite putting glue gone in the holes to break up any leaked blue lock-tite and heat gun to help loosen it up.
Pros:
- None
Cons:
- Unreliable to edc
Best Used for:
- Practicing malfunction drills
Would recommend: No
1 of 1 found the following review helpful.
Not bad at all
Fit and finish are proper. Functions correctly. 250 rounds no problems as far as functioning. Only issue was the front sight loosened up after the first 100 rounds. Little bit of lock tight and it’s good to go. Worth the money.
Would recommend: Yes
2 of 3 found the following review helpful.
Solid value
Arrived fast and was packaged well. Fit and finish was good. Slid on dagger frame and fit as it should. Functioned as it should. There was a small area of thin finish/wear by rear site.
Would recommend: Yes
3 of 3 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?