Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
works with Primary Arms
this is very good quality built QD mount with very light weight and very solid holds it's also working with my Primary Arms 3x Compact Prism Scope w/ 7.62x39/300BO ACSS Reticle Code: 29R-RS-PAC3XAK300BO and I'm very glad about it �
great mount
Much lighter and lower profile than the ta51 mount. If you need more stability, midwest makes a 2-latch version
Would recommend: Yes
Midwest Industries ACOG 1 Lever QD mount
Excellent quality product from MI. I wanted a QD mount that would be secure and low-profile. Low-profile, as compared to the Trijicon standard mount (thumbscrews). The QD lever takes up approximately 2/3 of the space that a Trijicon thumbscrew takes up. This minimises the chance of catching your hand on the charging handle of a Troy Side Pull Sporting rifle.
Would recommend: Yes
Not for PA 5x prism full size
I have a Primary Arms 5x prism full size optic. This base is too long and will not allow me to have the optic further to the rear of the rifle so as to compensate for proper cheek position. The eye relief is good for the optic but not good enough with the mount being so long. It’s a great product, just not for the PA 5x full size prism.
Would recommend: Yes
Great QD Mount
Great product. Simple to set up. Makes the ACOG even better!
Pros:
- Easy setup
Cons:
- None
Would recommend: Yes
Great mount
My first MI product & it works great. It mounts solid
to 2 different rails. You may have to adjust it a little.
I put a drop of gun oil in the spring & clamp pin.
This seemed to help smoothness on clamp & release
Very happy with purchase.
to 2 different rails. You may have to adjust it a little.
I put a drop of gun oil in the spring & clamp pin.
This seemed to help smoothness on clamp & release
Very happy with purchase.
Would recommend: Yes
Excellent Lightweight Mount -
Midwest makes a great mounting system. I really like the finish and solid lockup (be careful not to bind the QD system as the catch can come out of alignment when it's open)
I use these on all my ACOGS
Good Stuff
I use these on all my ACOGS
Good Stuff
Pros:
- Solid lockup
Cons:
- QD system can be a little finnicky
Best Used for:
- All ACOGs
Would recommend: Yes
Great for the price, sometimes hard to undo
I purchased the 1 lever quick disconnect mount for my ACOG and found it to have excellent build quality, excellent value, might be a little hard to open sometimes to adjust properly. Unit is very light and is a perfect fit for the ACOG. You can’t go wrong with this product
Would recommend: Yes
0 of 1 found the following review helpful.
Nice Quick Detach
I bout this for my Primary Arms 3x39mm Compact Illuminated Prism Riflescope it fit perfectly. It mounted nicely on to my 300 black out. Easy adjusting and very solid, release is smooth and mounts with ease. I would definitely buy this product again. Looks great on the rifle.
Pros:
- Price
- Easy Mount
- Solid well built
Cons:
- None
Would recommend: Yes
4 of 4 found the following review helpful.
Robust and easy to install!
I took a chance with a product for an ACOG NOT made by Trijicon and was quite please. The install was easy, the make of the mount was robust and sturdy with adjustable Picatinney rail tension. Worked just as advertised with only one lever. My only advice is to READ the instruction all the way through BEFORE installing.
Pros:
- EASY INSTALL
- Adjustable tension
- Robust design
Cons:
- None
Best Used for:
- TA31 ACOG
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?