Reviews & Ratings for TRYBE Optics DiMA1000 Laser Rangefinder — 6 reviews — Page 1

My first TRYBE DIMA 1000 experience was in combination with the TRYBE LEO 1-8x24 scope. These two products work with each other, so the yardage read by the DIMA 1000 is displayed directly in the field of view of your riflescope while aiming!
I installed the scope and mount on what is labeled #2, a TRYBE .300 BLK heavy nitride barrel with A2 bird cage. It shoots everything well and is an excellent candidate to use for this test because of the huge trajectory of the subsonic .300 BLK cartridge.
I installed the 1-8 scope using the included TRYBE mount and the accessory picatinny ring half it came with. This is where the DIMA would go, mounted directly on top of my riflescope mount with the 30mm accessory ring half. I bore sighted it across the shop at about 20 yards and later took it out for a spin at the range, sighting it in at 50 yards. The LEO has excellent optics and adjustments and I tell you, it sure looks and performs just like a Strike Eagle with a cooler reticle that can be used for both 223 and 308 cartridge families.
After cleaning I installed the DIMA in its 30mm ring onto the accessory pic rail on top of the scope and leveled it by eye. I removed the little screw covering the integral laser in the objective of the DIMA, just under the emitter and receiving windows of the rangefinder. My scope had been sighted in and I measured the DIMA’s optical center at about 2 inches about the scope’s optical center.
I attached the remote pressure pad the scope came with. ...
Read More...