The CR2032 battery is located under the brightness adjustment dial. For assistance, email us at Techsales@opticsplanet.com.
You will need a Weaver base to mount the BSA Optics Illuminated Sights 30mm Red Dot to the Crickett. We currently do not have a Weaver scope base for the Crickett. However, the Davey Crickett Scope Mount Base at the link below will work with your rifle but is a 3/8" dovetail base, so you will need an optic that can be mounted to a the 3/8 dovetail or dovetail rings to mount and optic.
https://www.opticsplanet.com/davey-crickett-scope-mount-base-specifically-for-22-caliber-single-shot-bolt-action-b.html
The BSA Optics Illuminated Sights 30mm Red Dot requires, and includes, (1) CR2032 battery.
BSA Optics offers a replacement rail that comes with the screws, Part # BNCP-1, you can contact BSA Optics at 479-636-1200, press 1 to transfer to customer service to speak with a representative.
The illumination knob should be topped by the battery cap. That should remove via turning counter-clockwise.
No, it is not.
You will need to measure the outside diameter of your lens and then try to find a Butler Creek cover or other cover that matches the measurement you found.
Unfortunately the manufacturer was unable to provide us with that information. If you would like to discuss it with them further, you can reach them here: https://www.bsaoptics.com/contactus.aspx. I apologize for the inconvenience.
No, it is not because there are no threaded anti-reflection devices (kill flash) available for this red dot.
This unit takes a CR2032 battery, which can be found here: https://www.opticsplanet.com/s/cr2032?_iv_categories=batteries