Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Satisfactory quality
While this part is not the fancy high end buffer tube, that some sell, it does the job and is inexpensive. Some parts on a rifle simply have to do their intended job, with no issues. They don't have to be a high end, super expensive part to do that. This part fills that category. I've bought a f...
Read More...
Read More...
Most Helpful Negative Review
Cavities on inside of buffer tube.
Bought this and installed in a AR10 build. After first range trip, noticed a chunk of black metal in the trigger assembly,and the buffer had trouble cycling and would stick. It was catching on these pits/cavities in the tube. After removing the buffer, I noticed a large chunk of the inside of the bu...
Read More...
Read More...
Tube is fine for the dollar but...
It screws into the receiver and has NO tab channel! No one sells the H2 receiver end plate that this will work with unless you pay $50.00 and have a rifle sling on it you do not want. Dissapointed in JE not the product.
Would recommend: Yes
Looks good but...
The buffer tube looks and feels solid. Once installed, it appears to push the buffer retention pin down too far into the receiver and causes the buffer to jump out (almost got smacked in the face) if there's a little bit of outside force, like a tap on the work bench. I thought I installed it improperly so I tried it on a couple of other lowers, did the same thing, buffer comes rushing towards the face. Looks like the threads on the tube may be a little long, if not fully installed the buffer stays in place and doesn't come rushing out. Going to see if I can return it and if not, looks like some garage gunsmithing will be needed to work properly.
Would recommend: No
Perfect for a long barrel 5.56 build
Works like a charm, part of a larger overall solution, but at the end of the day, my rifle has very little recoil and keeps my eye on target, as well as on subsequent rounds—very high quality.
Pros:
- recoil absorbing
- Recoil = Gone
Cons:
- None
Best Used for:
- long range
- Long barrels
- Long range shooting
- Long range / precision shooting.
Would recommend: Yes
It’s what it tiz
Fits up great, springs and buffers run smoothly in it. If you like your threaded end to cover the buffer retainer plunger, it does hold it in place, yet if you have a sloppy fitting buffer retainer plunger, the plunger might ( might!) be able to work past this buffer tube end just saying.
Pros:
- good quality
Cons:
- None in my book
Would recommend: Yes
1 of 1 found the following review helpful.
Mr. Gibson
Product is as described well made, I recommend it 100% I have used for two of my projects and love them
Would recommend: Yes
A2 Buffer Tube
Buy from Optics planet . Cheapest and FAST delivery
Best Used for:
- AR , rifle configuration.
Would recommend: Yes
These tubes work well enough.
I found these tubes to be 1/16" shorter than most. They actually work very well with the Magpul Moe Non-adjustable rifle stocks. I used one with one of them and the other with a A2 styke sock using a 1/16" thick washer up under the stock spacer. I glued the washer in because it's the only one that needs it. All in all, this was to stop the stock spacer from ratting inside the stock and keep everything tight. These tubes were inexpensiv yet heavy duty.
Would recommend: Yes
1 of 1 found the following review helpful.
Not enough threads
It isn't long enough to hold in the buffer retainer. Useless pos.
Would recommend: No
2 of 2 found the following review helpful.
Good buffer tube
This buffer tube does everything you needed to. The fit and finish are good any it fits the a2 type stock perfect. This was used on a PRS chassis and performs perfectly with a magpul prs stock. You can pay twice as much for marginal improvements but you don’t have to with this.
Pros:
- Fit, finish and price
Cons:
- None
Best Used for:
- ar15, ar10, prs chassis
Would recommend: Yes
1 of 1 found the following review helpful.
rifle buffer tube
When I receive the rifle tube it had very nice threads on it. It easily bolted up to my my LR308 receiver and I put a bag pour about a rifle stock over it. It fit great and I am happy. I would definitely buy another.
Pros:
- Great deal for the money
Cons:
- None
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?