Free Shipping & Free Returns*

FREE SHIPPING on Over 250,000 Products

Shop now and get Free Value Shipping on most orders over $49 to the contiguous 48 states, DC, and to all U.S. Military APO/FPO/DPO addresses.

Enjoy our FREE RETURNS

We want to ensure that making a return is as easy and hassle-free as possible! If for any reason you are not satisfied with your purchase, simply return the item within 30 days of receipt, and we'll cover the cost of return shipping. Learn more about our Return Policy.

Shopping Cart
Maxim Defense CQB PDW Brace for AR15
Currently Unavailable View Product
Compare (0)
Most Helpful Positive Review Very Nice, but SB Tactical is better
First off, I have both. MAXIM PROS: Shorter. Comes with JP already. CONS: not as many buffer options (like H2). Might cause issues if you’re shooting suppressed from short barrel (the backpressure sheared mine completely. JP replaced it, but be aware of it). Now they changed the rod to give it a lit...
Read More...
Most Helpful Negative Review Great F&F, but NOT WORKING
I bought the Maxim PDW brace to install in a (fully functional) Aero Precision 300 Blackout with 8.5 inch barrel. I installed the Brace, with standard buffer/spring combo, and went to town, only it never left the driveway... After replacing my barrel, replacing my BCG, expanding the gas port and ins...
Read More...
Show
Sort by
Filter by

shorter is better.

by Gabe, Verified Owner from GA, United States Written on January 14, 2020
I bought this setup with the JE silent capture spring. I also have JE adjustable weight bolt. (vmos) I run this with the lightest weight possible on the spring and bolt. I have a superlative adjustable gas block. I have this tuned to use the leat amount of reciprocating mass and low pressure. Smoothest and shortest AR I own. I run it with a can and without a can, I do not have to adjust anything in between the 2.
Would recommend: Yes
0 of 1 found the following review helpful.
Was it helpful to you? Yes | No

Maxim Defense CQB PDW Brace

by Perkwar, from TX, United States Written on August 12, 2019
Excellent product. Made to last. I can’t say enough about this brace. The fit and finish is great and it is designed to fit perfectly. The padding on the brace is soft but rugged. When you cheek the brace it is comfortable.
Pros:
  • None
Cons:
  • None
Would recommend: Yes
2 of 2 found the following review helpful.
Was it helpful to you? Yes | No

CQB Brace AR pistol

by Rolgeneral, from AZ, United States Written on June 1, 2019
Good stuff real good quality solid feel easy install a must have. Best brace in the market that can conceal well handle is not flimsy rubber on stock is thick good quality not like other brands this will make your AR pistol look sleek and expensive looking
Would recommend: Yes
Was it helpful to you? Yes | No

My new favorite pistol brace

by Robbie, Verified Owner from PA, United States Written on May 7, 2019
I’ve had this brace for some time now. I’ve laid had many other braces and this one is definitely my favorite. Had a right and crisp lock up at staying open or closed. Very good ergonomics and when collapsed it is very mobile.
It’s also built like a tank. Very solid brace. Highly recommend.
Pros:
  • Great looking and comfortable
  • Tank like construction
  • right lock up
Cons:
  • Pricey
Would recommend: Yes
Was it helpful to you? Yes | No

Maxim AR-15 Pistol Brace

by Michael, from ID, United States Written on May 2, 2019
I am completely satisfied with the Maxim AR-15 pistol brace. It is an exceptional design and very sturdy. The install was simple and takes only a few minutes. The QD mounts at the 11 and 1 o'clock positions work great with my Magpul sling. Great job Maxim Defense!
Pros:
  • great design
Cons:
  • Expensive
Would recommend: Yes
Was it helpful to you? Yes | No

Excellent and high quality

by Mike, from OH, United States Written on April 7, 2019
This brace is excellent and is clearly high quality. It also folds down for smallest storage, with the rails fitting perfectly down the upper and lower frame. I also ordered the one with the silent captured spring, which will be the first I have ever had. The quality is excellent, and while I do not have a can, I hope to eventually and it will make a big difference. Only brace I ever want to use for future ar pistols!
Best Used for:
  • ar pistol
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you? Yes | No

Great Looking CQB Brace

by smokeo, Verified Owner from SC, United States Written on April 1, 2019
After searching for quite some time for the best brace for my new 300BLK build I finally decided to take the hit on this one. The brace looks good and has a very solid feel to it. After using it several times I'm now able to deploy it without depressing the latch, couldn't do so when it was new which is understandable due to the strong build and tolerances used.
I think this is the best brace on the market at this moment. with that being said there are some things that I believe should be addressed. The false castle nut on the buffer tube has small ridges on it for grip when tightening it I presume. These ridges protrude slightly past the lower allowing the charging handle to hit it. This doesn't seem to hinder the functionality but after a couple uses it does strip the black off of the buffer and leaves bare aluminum. The second issue I have is the finish on the inside of the buffer tube. Which is the biggest issue. The tube is left with micro ridges from front to back. I made the mistake of buying this brace with the standard style buffer and spring which rubs the ridges all the way down and forward when charging or firing the weapon. It makes a pretty loud and annoying sound (cant imagine what it sound like suppressed)I have some way cheaper buffer tubes that are smooth with virtually no sound. I had to break down an buy the JP captured spring and buffer to fix this issue. Which would have been done to begin with if I would have known. Shouldn't be issues at this price.
Pros:
  • Looks great
  • Sturdiness
Cons:
  • loud when opperated
  • needs finishing touches
Best Used for:
  • go with captured buffer spring
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you? Yes | No

Well made and sleek looking

by Skywalker, Verified Owner from FL, United States Written on March 18, 2019
Best looking brace currently made, in my opinion. practically zero wobble, smooth operation, and comfortable to use. The rubber "brace" part is soft feeling yet firm (not squishy). Not knocking a star for this, but, the part that's designed to wrap around your arm is very small and unless you have child-sized arms the strap isn't long enough go around the arm in order to use "as designed"

Works great on my 10.5 300blk build. Cannot really comment on recoil difference as I've only ever fired the gun with this installed but the recoil is very manageable.
Pros:
  • compact
  • aesthetic and Function
Cons:
  • Price $$$
Would recommend: Yes
Was it helpful to you? Yes | No

Great Product

by John, from LA, United States Written on February 23, 2019
I bought this for a mk 18 build. I love it. Looks great and makes the whole rifle very compact. It was exactly as I expected it to be. Optics plant gave me a great price a very fast delivery. I recommend them and the product.
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you? Yes | No

Awesome brace!

by Mike, from VA, United States Written on December 14, 2018
Outstanding quality and value, even if it's pricey compared to other braces. This brace is on a different level. Locks up tight in any position, collapses easily and to a very short length, but opens up quickly. The JP silent captured spring is smooth and quiet, too, and a nice addition over the usual buffer and spring setup.
Would recommend: Yes
0 of 1 found the following review helpful.
Was it helpful to you? Yes | No
There are no reviews that match your criteria. Would you like to review this product?