by
Aspirit,
Verified Owner
from OH, United States
Written on September 22, 2024
Seems to be a great mount. Paired with my weaver piggyback off set mount
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Charly,
Verified Owner
from FL, United States
Written on May 30, 2024
Works great! Spent all day on the range sighting in my new Springfield Armory M1A. Had to snug down the thumb screws after every 100 rounds, but the held zero. Hitting 6 inch steel at 300 yards consistently.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Sasquatch,
Verified Owner
from NC, United States
Written on February 21, 2024
I'm not sure what is so difficult about providing torque specs for a scope mount. This mount seems to be good quality. However, no torque specs were provided so I was left to guess about it based on other scopes with similar cross bolt size. The nut, which appears to be glued into the mount, ended up stripping (or breaking free) so I had to return it for a new one. I have two of these mounts (one 30mmm and one 1" tube) and they hold tight, keeping the scope zeroed. You just have to be careful not to over-tighten - maybe no more than 30 in lbs. Or call the manufacturer and ask.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
gene,
Verified Owner
from OH, United States
Written on October 29, 2023
I bought this Weaver Thumbnut SPR 30mm Mount because I wanted to save some money on optics... The idea is instead of investing $600 to $900 in optics on every rifle I build or buy I can just use it with my best scope and easily transfer it to another rifle... It could be a hassle to sight it in every time I switch it or not, I guess time will tell.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Juan,
Verified Owner
from AZ, United States
Written on October 15, 2022
Best combination of cost and weight, not to mention the quality manufacturing and the conveyance of installing and removing without a tool. The double screws on the caps sure the optic very well. The clamping bar is full length. The thumb screws have good knurling on the edging and accommodate a large bladed screwdriver.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Bluesvet,
from MS, United States
Written on June 15, 2019
I needed a higher mount for my 300 blk set up. I was constantly crane(ing) my neck in an awkward position trying to find the target. This mount so far has been a definite improvement. Any tall person struggling to find the objective on an ar collapsible stock might consider this mount.
Pros:
- Extra height improves sighting
Cons:
- Unsure of best way to tighten screws
Would recommend: Yes
2 of 2 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Matt,
from WA, United States
Written on May 19, 2019
Great mount for the money. Great 30mm mount. Well built, the offset is what I got for the eye relief for a 1x8 atibal scope. Optics planet always has the best prices out of all the big distributors....
Would recommend: Yes
2 of 2 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Aggiegun,
from TX, United States
Written on April 17, 2018
Arrived quickly from Opticsplanet as usual. The unit appears to be well made and finish quality, paint edges, etc are very good. Robust in design and well made so there should not be a concern when I comes to durability but also seems a bit heavy.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
johnny,
Verified Owner
from TX, United States
Written on April 17, 2018
This is a good product at a good price but it cannot be tightened sufficiently by manually turning the thumbnuts with the thumbs alone. Weaver knew this and provided a slot for this purpose, but they should have made the slot fit their weaver scope ring wrench. I accomplished this in a few minutes with a jeweler's file.
Best Used for:
- Quick change scope changes
Would recommend: Yes
2 of 2 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Andrew,
from IN, United States
Written on January 19, 2018
This scope mount appears to be made well. Some seem very poorly constructed, this one doesn’t. Looking forward to using it. Going to order another in the near future. I especially like the thumb but feature for easy on and off.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?