Valhalla Tactical Ruhk Adjustable Offset Mount

Introducing the world's first adjustable offset mount developed specifically for 1.93 heights! "Quite possibly the coolest single accessory of SHOT Show 2020" - Recoil. Pivot body allows the backup optic to rest as close to, or as far from, the primary optic.1.93 height improves shooting comfort and much more NVG friendly. Grade 5 Titanium provides maximum strength. Interchangeable base plates for use with multiple brands of optics. Also available for co-witness height. User-replaceable towers can convert mount to different optic heights in the future. Completely reversible for right or left-handed shooters. RMR base plate includes removable cover for accessing the RMR's battery compartment. Battery access cap is designed to store 1x spare battery; useful even for other RDS. Retains reasonable point-of-impact in CQB situations even if mount is impacted and pivoted. "Clamp+Tower Only" option will NOT include any optic plates (but will include the 4x screws that attach the optic plate to the tower). You can build a hybrid mount by choosing this option plus one of the aluminum optic plates for Valhalla Tactical's Hanger series.

Optic Plate Compatibilities:

RMR: also fits Holosun 407C/507C/508T or other RDS with Trijicon compatible footprints.

DeltaPoint Pro: also fit Holosun 407K/507K or other RDS with DeltaPoint compatible footprints.

Aimpoint Micro: T-1/H-1/T-2/H-2 plus other RDS with Aimpoint Micro footprints.

RTS2: also fits Vortex Razor Red Dot or other RDS with CMore RTS2 compatible footprints.

Installation Instructions:

Optic-plate to Tower screws (4x): Medium thread locker @ 12 inch-lb.

RMR to base-plate screws (2x): Medium thread locker @ 12 inch-lb.

Tower to clamp screws (2x): Medium thread locker @ 25 or 60 inch-lb.

25 inch-lb to allow strategic "stress-relieve" shifts under impact (might save your optic).

60 inch-lb for high holding strength (will not shift even under moderate impact).

1 drop of high strength thread locker on the pivot surface @ 60 inch-lb for absolute hold strength (warning: your optic may break before the mount shifts).

RMR battery cap: Finger-tighten only. O-ring will hold cap in place.

Use 5/64 hex driver for the 4x optic-plate screws; 9/64 hex driver for the 2x clamp screws (hex drivers NOT included).

System Weights: Tower + Clamps + all screws: 39g (1.93) / 34g (co-witness). RMR Optic Plate: 21g. RTS2 Optic Plate: 19g. T1 Optic Plate: 14g. DeltaPoint Pro Optic Plate: 19g. For example, total system weight for the heaviest setup (RMR + 1.93) would be 39g+21g = 60g (or, only 2.1 oz)

Package Contents:

• Valhalla Tactical Ruhk Adjustable Offset Mount