Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Tight tolerances
This product allowed me the use of many of my scopes for night vision. I simply clip on my Armasight to any scope mounted on my rifles. Keep in mind, and I have not tried it, it is not recommended to be put on anything .308 and above due to the recoil severity...not sure why you'd want to shoot a .3...
Read More...
Read More...
Most Helpful Negative Review
Armasight strikes out again
I have had a few run ins with armasight. Their products are hit or miss. This mounting system fits loosely on my 40 mm objective and wont even come close to fitting my 44 mm objective. It's a great idea but unless you own a dedicated nv scope I wouldn't go this route. They first kit they sent me...
Read More...
Read More...
Works great, but pay attention to the size
Just know that because it says it will fit a 50m scope...it's not measured by the objective, but the objective housing's OUTSIDE diameter. Use a caliper to determine the actual size, and you'll be good. Very sturdy, and does what it's supposed to do.If you have an Armasight clip on, this is the way to go.
Would recommend: Yes
Doesn’t fit
I have a 50 mm scope so I ordered the adapter that fit up to 50 mm but it is too small. Seems like it is nicely made of an aluminum material with a screw on adjustment and a number of plastic adapters in case your scope is smaller. Going to have to send back and get the next size larger I guess
Would recommend: Yes
Clip-on adapter that states it fits 38-42mm objective bell does not fit 40 to 42 mm bells!
Despite reading the description thoroughly, and double checking that my objective bell size; the adaptor received does not fit as advertised. there are shims to adapt to bells supposedly from 38 to 42 mm. Even without the shims, it clearly will not fit over a 42 mm bell. I tried it without the shims on a 40 mm scope and it still did not fit! Do not purchase if you are trying to use on a 40 to 42 mm objective bell. These parts are not inexpensive and the description of the adaptor is not accurate. Hopefully this review saves you the time and hassle of having to go through the return process.
Would recommend: No
Had to be a bit creative for System 2
After discussing my Leopold VXII 2-7x33 scope with Flir/Armasight, I was told to buy this mounting system (#2) because the OD of my scope's objective piece was 39mm. Unfortunately, the two sleeve inserts that came with it would NOT fit correctly! One was too thin and left the scope too loose in the mount; the other was too thick and the scope couldn't be inserted into the mount. Fortunately, I had a bag full of inserts from my original purchase of the Armasight CO-MR device years ago. With a little sizing and trimming, I actually found a sleeve insert that was in the middle, thickness wise, and it fit the scope perfectly. The sleeve inserts are hit or miss with Armasight, as another reviewer mentioned, and you sometimes need to be creative. I wish they would ship out more inserts with each purchase in case someone runs into this problem with his/her particular scope
Would recommend: Yes
1 of 1 found the following review helpful.
Super Mounting system
I purchased the clip on adapter system to be used with various scopes I have, from 40 mm to 50 mm it was the system #3 which works great using the inserts that are provided. Some of the inserts were not thick enough so thank god for ice cream pails, cut a few strips out and mold with a little heat and it works on different rifle scopes and you can mark the strips with a silver marker for each scope. MB
Would recommend: Yes
2 of 2 found the following review helpful.
Armasight Mounting Ring
Great product to quickly swap between a regular scope and the Armasight night vision scope. I own 3 sizes to cover all my scopes Only complaint. Is the thread protector ring, the allen screws are so small you have trouble finding a allen wrench to remove.
Would recommend: Yes
1 of 1 found the following review helpful.
Clip-ons mounting system
If you lean toward clip-on system (not dedicated night vision scope) or already got one, Armasight Scope Mounting System is a must-have accessory for you. You definitely can use your rail if its length allows seating both day scope and clip-on. But if not, as in my case, scope mounting system comes to your aid.
A special advice from me – take scrupulously the size choice. As the wrong diameter’s gonna make you unsatisfied with the whole sight. System needs to fit the day scope objective precisely! Ask a sales manager for advice.
A special advice from me – take scrupulously the size choice. As the wrong diameter’s gonna make you unsatisfied with the whole sight. System needs to fit the day scope objective precisely! Ask a sales manager for advice.
Would recommend: Yes
2 of 2 found the following review helpful.
Armasight Scope Mounting System for Clip-On
I bought this product 7 months ago (despite the bad reviews), together with the Armasight CO-X HDI, and I couldn´t be happier. I go out hunting almost every week, and I haven´t had any problems so far. I use it to join the CO-X with my Swarovski 56mm scope, and it adjust perfectly. Using a rubber ring first (which comes with it), in order not to scratch the scope, I can mount it in 30 seconds in no light conditions. The only thing I didn´t understand at the begining was that you have to remove the little metal ring from it, otherwise it won´t fit in the clip-on (you can see the little ring in the picture. It has a little screw on one side. First, I tried to unscrew it, but then I realised I had to rotate it out. My fault).
Pros:
- simple use
- fits perfectly
- Fast mounting
- perfect accessory for clip-ons
Cons:
- None
Would recommend: Yes
mounting sizes not accurate
I bought this product to mount an apollo to a leupold mark 4 50mm . I got the system for a 47-50mm objective scope and its not even close to being able to fit. I would like to order the next size up for the 56mm to hopefully fit but dont know if it will be too big, then will have wasted over 200 dollars on mounts that i cant use.
Would recommend: No
2 of 3 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?