Elftmann Tactical ELF AR-9 Trigger

ELF match trigger got a makeover by adding an incremental adjustment knob. The advantage to this knob is to adjust the pull weight by increments by turning it with your finger or any flat tool/coin. The spring in the housings and the notch on the adjustment screw does not allow the trigger tension to change its settings without manually setting it and will not allow it to back out. If it did back out, the trigger will still function just under 3lbs. It is still ELF normal match trigger as before but even more bulletproof!

The ELF AR-9 Drop-In Match Trigger has been built for performance. Secifically developed for 9mm and .45 PCC platforms, after tens of thousands of rounds of testing in all platforms, the boss has decided this is the best trigger they have ever produced and does it all in every AR platform. It has a u-shaped captured disconnector that forces a positive hold on the hammer and also has a ''pad'' that matches up to an extension on the hammer. The pad is directly in line with the rear trigger pin so when the hammer is stopped by those matching surfaces it effectively eliminates trigger slap from the hammer hitting the disconnector and greatly enhances the feel of the trigger during live fire. Absolutely compatible with the Sig MPX!

All the performance series triggers utilize aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft grade aluminum. Installation can be done in minutes using your ARs original hammer and trigger pins. The match trigger may be ordered with a curved or straight shoe. The amazingly short take-up, glass-rod crisp break and next to zero over travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-9 / AR-45 platform, this is the trigger system for you.

Features of Elftmann Tactical ELF AR-9 Trigger

• Incremental Adjustable Knob
• Compatible with Sig MPX which was used extensively in development
• Absolutely Drop-Safe regardless of pull-weight
• Factory set Pull-weight is approximately 50% lighter than that of a standard AR platform trigger, providing a great combination of speed and accuracy
• Adjustable from 4lbs to 2 3/4lbs without removing from lower
• Full power hammer spring ensures proper ignition of primer
• Very short pull and reset allows for rapid follow up shots and greater accuracy
• Sturdy trigger assembly designed for rugged, trouble-free use
• Unique design of disconnect allows full 1/4 width eliminating possibility of wear and double-firing
• High performance trigger and hammer sealed bearings for smoother and faster firing
• Unique features include captured disconnector eliminating any possible double fires and anti trigger-slap geometry greatly enhancing live fire

Package Contents:

• Elftmann Tactical ELF AR-9 Trigger

The Elftmann Tactical Elftmann Trigger Ar-9 Curved Adjustable 2.75-4lbs. Mil-spec is a quality addition to the Elftmann Tactical lineup. For more great deals on AR Triggers by Elftmann Tactical, please browse our Elftmann Tactical Gun Parts page.